EN-6712
1year
1year
Non-standard Sling
Steel
>6T
Welding Type
Folded Eye
Steel Core
Hydraulic
Flat
GS, CE, RoHS
Yellow
35t-50t
Lifting Containers
Q345b
as Customer Need
Material Handling Equipment
BV/CCS/ABS
Small Terminal and Inland Port
enjue
Nude Package or as Your Required
20ft 40ft
China
843141000
Product Description
High quality Overheight Container for Transporting Container
1:Product Description
This spreader is suitable the double-link portal crane or jib crane, and the main paraments is as follows:
1), Suitable for 20`-40` telescopic spreader
2), Capacity under spreader: 40t
3), lifting capacity of four lugs: 10t*4
4), Dead weight: ~7800
5), Dead weight of rotation hook: 1600kg
6), Power: AC380V(3phase)50Hz or 60Hz
7), IP class: IP55
Our Services:
Act as a good adviser and assistant of client, we can help them to get rich and generous returns on their investment.
1.Pre-sale services:
a: Design customised project for clients.
b: Design and manufcture products according to clients special requirement.
c: Train technical personnel for clients.
2.Services during the sale:
a: Help clients to find reasonable freight forwarders ahead of delivery.
b: Help clients to draw solving plans.
3.After-sale services:
a:Assist clients to prepare for the construction scheme.
b:Install and debug equipment.
c:Train the first-lin operators.
d: Examine equipment.
e: Take initiative to eliminate the troubles immediately.
f:Provide techical exchanging.
Parts Introduction
1. Lever For Operating Rope
2. 20'&40'Heavy Duty Container Spreaders
3. Semi-Automatic or Manual Operation
4. Extra Large Lifting Rings 180*340mm 180*340mm
5. Actuation Spring
6. Spring Support
7. Operating Handle
8. Twist lock
9. Actuation Gear For Semi-Automatic Operation
Spreader Characteristics
1.The spreader adopts box-type end beam, so the structure is stable. The twist lock is leak proof structure, which protects the parts from rusting
2. Four hoist points structure, which lighten the dead weight of the spreader, and enhance the stability of the spreader.
3HS20'/ HS40' spreader adopt Heavy hammer type semi-automatic twist lock,manpower to turn the pin is no need any more, which highly improve the work efficiency and safety on spot
Safety Protection
.When the spreader lifts container, the load should not exceed the max. SWL.
2.When using the spreader, using design function only.
3. Person shouldn't stand under the lifting spreader.
4. After operation, please check if there are damages on the spreader, if fasteners loose. If so, please repair timely.
Repair and Maintenance
1.Twist lock
1. Each twist lock should be lubricated (Grease ZG-3), lubricate the spreader half a year.
2. Hinge point of the connecting rod should be lubricated frequently.
3. After operation, please check if there are damages on the twist lock.
Bearing block of the connecting rod should be lubricated frequently.
1. After 50 hours' and 250 hours' operation, all the fasteners should be fastened again, and all the lubricating parts should be lubricated.
2. After 100 hours' operation or lifting 1500 containers, check if all the screws and fasteners are fastened. If loose, please fasten again.
3. After 1000 hours' operation or lifting 15000 containers, all the lubricating parts should be lubricated.
4. After 1500 hours' operation or lifting 25000 containers, the twist lock structure should be checked.
a)Disassemble all the four twist lock structures.
b)If any problem, please replaced accordingly.
c)Washing all the parts.
d)Install the four twist lock structures.
5. After 3000 hours' operation or lifting 50000 containers, the twist lock structure should be checked, if there are c racks or other faults, please replace timely.
6. After 6000 hours' operation or lifting 100000 containers, please replace the twist lock structure.
FAQ:
Before you send us an inquiry about container spreader, please let us know some information as following:
1:What is lifting capacity of spreader? What is type of spreader? Semi automatic container spreader, New I type spreader, motor spreader, hydraulic telescopic spreader or electro telescopic spreader?
2:If what you need is telescopic spreader, please confirm it is hydraulic telescopic or electric telescopic?
3:What is the using temperature of spreader?
4:Will you match a rotator with the telescopic spreader?
