Z500-3A
Universal, Industrial
Adjust Speed
Excited
Control, Driving
Closed Type
4
Brush
Z4
ISO9001, CCC
Sec
2
4
6
semc
Plyingwood
Servo Motor
China
8501340000
Product Description
Shanghai Electric Sec Z500-2A DC Motors
Shanghai Electric Sec Z500-2A DC Motors
Deeply appreciate your enquiry, We are biggest of chinese government company 30 years experiences,1000 workers with 1 billion USD turnover in shanghai china .Welcome your visiting !!
This series motor used polygon structure so that the using rate of the stator's inner space is vary high. The magnet yoke is laminated style, suitable for silicon controlled commutate power supply, and it can edure pulsating current and rapid change of current (load change). Magnetic poles are fixed by precise orientation. All the motors of system are with compensate winding, so the reverse performance is very well. The insulation class of the motor is F, using of reliable insulation structure and nonmenstruum vacuum pressure impregnated, guaranteeing the stable performance of insulation and good heat dissipation.
1. Data listed in the technical data sheet should be employed under the following conditions:
A)Altitude above sea level maximal1, 000m;
B)Cooling air temperature maximal40° C; COOling water temperature maximal32° C;
C)The motor can be installed under foul situation, but the right cooling method of cooling method of cooling and defend class must be chosen. If the situation is special, need humid tropic, please negotiate.
D)The motor is suitable for 3-phase bridge style comoothing reactor, also can adopt power supply of DC generator.
E)The motor accord with GB755The ration and performance of the rotating electrical machinery\IEC60034-1 The ration and performance of the rotating electricel machineryand JB/T9577Technical requirements of series Zmiddle motor electromotor;
2. The standrd rated voltage of the electromotor are 440V\550V\660V\ 750V etc. Voltage of other classes can also be derived according specific situation, but must be negotiated when ordering.
3. The basic excitation style is separately excited, the excited voltage is 220V, Voltage of other classes can also be derived according specific situation, but must be negotiated when ordering.
4. Short time overload capacity of motor.
Motor can be divided into two kinds according to the use
Frist kind (A): Ordinary industrial DC motor; Second kind(B): Metal rolling mill DC motor.
A)First kind(A)motor can endure the overload(1min)according to table 3
Table 3
Induction furnace is used for smelting or insulating ferrous metals, non-ferrous metals, sponge iron, such as scrap iron, scrap steel, copper, aluminum and so on. Complete working equipment such as continuous casting machine, rolling mill, mainly used for the production of billet, steel bar, angle steel, H-beam, I-beam, etc. Using KGPS, IGBT, single or double power supply technology, PLC (Siemens) can be realized throughout the monitoring.
Main supply list: 2 sets of electric furnace body, 2 sets of hydraulic or mechanical tilting electric furnace mechanism, 1 set of control platform, 1 set of intermediate frequency control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), low voltage control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), 1 set of capacitor cabinet, 4 or 8 water-cooled cables; 1 water temperature alarm, 1 leakage alarm; 1 crucible mold, 1 liquid One batch of pressure steel pipe, one set of copper row, three water tanks. Transformer, cooling tower, furnace builder, furnace lining ejector, furnace cover.
KGSP Induction Electric Furnace
GW-8-4000-0.5J KGSP Induction Electric Furnace
GW-1-750-1JJ Medium frequency coreless electric furnace
GW-50-22000-0.2J No induction melting furnace
GW-0.25-160-1JJ melting electric furnace
GW-1.5-1000-1J Medium frequency induction furnace
Note:
(1) GW - means medium frequency induction furnace, - 1 - means induction furnace capacity of 1 ton, - 500 - means furnace rated power of 500 KW, / 1 - means furnace operating frequency of 1000 Hz, / 0.5 - means melting furnace frequency of 500 Hz, - J - means hydraulic tilting furnace (furnace shell is steel shell), - JJ - means mechanical tilting furnace. (the shell of the furnace is aluminum alloy).
(2) The above quoted price is for routine configuration. Other configurations can be added, such as leak alarm, water temperature alarm, furnace switch, cover mechanism, lining ejector and transformer, cooling device (open and close cooling tower, closed cooling tower, plate heat exchanger)
3) If necessary, send technicians to carry out the commissioning: the domestic section is free; the overseas section travel expenses, accommodation and food are borne by the user and each person is subsidized 150 US dollars per day.
4) I quote EX-W at a price including simple packing, including shipping charges to Shanghai port area and all inland charges in China.
V) The above electric furnace voltage levels are 380V, 690V and 950/1000V, and the frequency is 50HZ. If the user equipment requirements are different from the above voltage levels and frequencies, each item needs to be increased by 15000USD.
Shanghai Electric Sec Z500-2A DC Motors
Deeply appreciate your enquiry, We are biggest of chinese government company 30 years experiences,1000 workers with 1 billion USD turnover in shanghai china .Welcome your visiting !!
This series motor used polygon structure so that the using rate of the stator's inner space is vary high. The magnet yoke is laminated style, suitable for silicon controlled commutate power supply, and it can edure pulsating current and rapid change of current (load change). Magnetic poles are fixed by precise orientation. All the motors of system are with compensate winding, so the reverse performance is very well. The insulation class of the motor is F, using of reliable insulation structure and nonmenstruum vacuum pressure impregnated, guaranteeing the stable performance of insulation and good heat dissipation.
1. Data listed in the technical data sheet should be employed under the following conditions:
A)Altitude above sea level maximal1, 000m;
B)Cooling air temperature maximal40° C; COOling water temperature maximal32° C;
C)The motor can be installed under foul situation, but the right cooling method of cooling method of cooling and defend class must be chosen. If the situation is special, need humid tropic, please negotiate.
D)The motor is suitable for 3-phase bridge style comoothing reactor, also can adopt power supply of DC generator.
E)The motor accord with GB755The ration and performance of the rotating electrical machinery\IEC60034-1 The ration and performance of the rotating electricel machineryand JB/T9577Technical requirements of series Zmiddle motor electromotor;
2. The standrd rated voltage of the electromotor are 440V\550V\660V\ 750V etc. Voltage of other classes can also be derived according specific situation, but must be negotiated when ordering.
3. The basic excitation style is separately excited, the excited voltage is 220V, Voltage of other classes can also be derived according specific situation, but must be negotiated when ordering.
4. Short time overload capacity of motor.
Motor can be divided into two kinds according to the use
Frist kind (A): Ordinary industrial DC motor; Second kind(B): Metal rolling mill DC motor.
A)First kind(A)motor can endure the overload(1min)according to table 3
Table 3
Induction furnace is used for smelting or insulating ferrous metals, non-ferrous metals, sponge iron, such as scrap iron, scrap steel, copper, aluminum and so on. Complete working equipment such as continuous casting machine, rolling mill, mainly used for the production of billet, steel bar, angle steel, H-beam, I-beam, etc. Using KGPS, IGBT, single or double power supply technology, PLC (Siemens) can be realized throughout the monitoring.
Main supply list: 2 sets of electric furnace body, 2 sets of hydraulic or mechanical tilting electric furnace mechanism, 1 set of control platform, 1 set of intermediate frequency control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), low voltage control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), 1 set of capacitor cabinet, 4 or 8 water-cooled cables; 1 water temperature alarm, 1 leakage alarm; 1 crucible mold, 1 liquid One batch of pressure steel pipe, one set of copper row, three water tanks. Transformer, cooling tower, furnace builder, furnace lining ejector, furnace cover.
KGSP Induction Electric Furnace
GW-8-4000-0.5J KGSP Induction Electric Furnace
GW-1-750-1JJ Medium frequency coreless electric furnace
GW-50-22000-0.2J No induction melting furnace
GW-0.25-160-1JJ melting electric furnace
GW-1.5-1000-1J Medium frequency induction furnace
| NO. | Electric Furnace Type | Input power (KW) | input voltage (V) | Input current (A) | Rated power (KW) | DC current (A) | DC voltage (V) | Melting rate (T/H) | working frequency (HZ) | working voltage (V) | cooling water pressure(MPA) | Rated capacity (T) | Power consumption (KWH/T) | |
| Power Supply | Furnace body | |||||||||||||
| 1 | GW-0.25-160/1JJ | 180 | 380 (6 Pulse) | 256 | 160 | 320 | 500 | 0.24 | 1000 | 750 | 0.1~0.15 | 0.25~0.3 | 0.25 | 790 |
| 2 | GW-0.5-250/1JJ | 280 | 380 (6 Pulse) | 400 | 250 | 500 | 500 | 0.4 | 1000 | 1500 | 0.1~0.15 | 0.25~0.3 | 0.5 | 770 |
| 3 | GW-0.5-250/1J | 280 | 380 (6 Pulse) | 400 | 250 | 500 | 500 | 0.4 | 1000 | 1500 | 0.1~0.15 | 0.25~0.3 | 0.5 | 770 |
| 4 | GW-0.75-400/1JJ | 400 | 380 (6 Pulse) | 650 | 400 | 800 | 500 | 0.6 | 1000 | 1500 | 0.1~0.15 | 0.25~0.3 | 0.75 | 770 |
| 5 | GW-0.75-400/1J | 400 | 380 (6 Pulse) | 650 | 400 | 800 | 500 | 0.6 | 1000 | 1500 | 0.1~0.15 | 0.25~0.3 | 0.75 | 770 |
| 6 | GW-1-500/1JJ | 550 | 380 (6 Pulse) | 800 | 500 | 1000 | 500 | 0.8 | 1000 | 1500 | 0.1~0.15 | 0.25~0.3 | 1 | 750 |
| 7 | GW-1-750/1JJ | 800 | 380/690 (6 Pulse) | 1200/ 700 | 750 | 1500/ 850 | 500/ 880 | 0.9 | 1000/ 500 | 1500/ 2600 | 0.1~0.15 | 0.25~0.3 | 1 | 720/660 |
| 8 | GW-1-750/1J | 800 | 380/690 (6 Pulse) | 1200/ 700 | 750 | 1500/ 850 | 500/ 880 | 0.9 | 1000/ 500 | 1500/ 2600 | 0.1~0.15 | 0.25~0.3 | 1 | 720/660 |
| 9 | GW-1.5-1000/0.5JJ | 1100 | 690 (6 Pulse) | 912 | 1000 | 1140 | 880 | 1.2 | 500 | 2600 | 0.1~0.15 | 0.25~0.3 | 1.5 | 700 |
| 10 | GW-1.5-1000/0.5J | 1100 | 690 (6 Pulse) | 912 | 1000 | 1140 | 880 | 1.2 | 500 | 2600 | 0.1~0.15 | 0.25~0.3 | 1.5 | 700 |
| 11 | GW-2-1500/0.5JJ | 1650 | 690 (6 Pulse) | 1360 | 1500 | 1700 | 880 | 1.7 | 500 | 2600 | 0.1~0.15 | 0.25~0.3 | 2 | 675 |
| 12 | GW-2-1500/0.5J | 1650 | 690 (6 Pulse) | 1360 | 1500 | 1700 | 880 | 1.7 | 500 | 2600 | 0.1~0.15 | 0.25~0.3 | 2 | 675 |
| 13 | GW-2-2000/0.5JJ | 2200 | 690 (6 Pulse) | 1400 | 2000 | 2275 | 880 | 1.9 | 500 | 2600 | 0.1~0.15 | 0.25~0.3 | 2 | 650 |
| 14 | GW-3-2500/0.5JJ | 2750 | 690/950 (6 Pulse) | 2275/ 1700 | 2500 | 2840/ 2080 | 880/ 1250 | 2.56 | 500 | 2600/3200 | 0.1~0.15 | 0.25~0.3 | 3 | 610/560 |
| 15 | GW-3-2500/0.5J | 2750 | 690/950 (6 Pulse) | 2275/ 1700 | 2500 | 2840/ 2080 | 880/ 1250 | 2.56 | 500 | 2600/3200 | 0.1~0.15 | 0.25~0.3 | 3 | 610/560 |
| 16 | GW-4-3000/0.5J | 3300 | 690/950 (6 Pulse) | 2730/ 2040 | 3000 | 3410/ 2500 | 880/ 1250 | 3.2 | 500 | 2600/3200 | 0.1~0.15 | 0.25~0.3 | 4 | 610/560 |
| 17 | GW-5-4000/0.5J | 4400 | 950 (6 Pulse) | 2300 | 4000 | 3330 | 1250 | 5 | 500 | 3400 | 0.1~0.15 | 0.25~0.3 | 5 | 600/550 |
| 18 | GW-6-4000/0.5J | 4400 | 950 (12 Pulse) | 2300 | 4000 | 3330 | 1250 | 5 | 500 | 3400 | 0.1~0.15 | 0.25~0.3 | 6 | 600/550 |
| 19 | GW-8-5000/0.5J | 5000 | 950 (12 Pulse) | 3400 | 5000 | 4200 | 1250 | 7~8 | 500 | 3400 | 0.1~0.15 | 0.25~0.3 | 8 | 600/550 |
| 20 | GW-10-6000/0.5J | 6300 | 950 (12 Pulse) | 3750 | 6000 | 4600 | 1250 | 8.5~9 | 500 | 3400 | 0.1~0.15 | 0.25~0.3 | 10 | 600/550 |
| 21 | GW-12-8000/0.25J | 8000 | 950 (12 Pulse) | 4900 | 8000 | 6000 | 1250 | 9~10.5 | 250 | 3400 | 0.1~0.15 | 0.25~0.3 | 12 | 600-550 |
| 22 | GW-15-8000/0.25J | 8000 | 950 (12 Pulse) | 4900 | 8000 | 6000 | 1250 | 9~10.5 | 250 | 3400 | 0.1~0.15 | 0.25~0.3 | 15 | 600-550 |
| 23 | GW-15-10000/0.25J | 10000 | 950 (24 Pulse) | 6500 | 10000 | 8000 | 1250 | 13~15 | 250 | 3400 | 0.1~0.15 | 0.25~0.3 | 15 | 600-550 |
| 24 | GW-18-12000/0.25J | 12000 | 950 (24 Pulse) | 8160 | 12000 | 10000 | 1200 | 15~17 | 250 | 3400 | 0.1~0.15 | 0.25~0.3 | 18 | 600-550 |
| 25 | GW-20-12000/0.25J | 12000 | 950 (24 Pulse) | 8160 | 12000 | 10000 | 1200 | 17~19 | 250 | 3400 | 0.1~0.15 | 0.25~0.3 | 20 | 600-550 |
| 26 | GW-25-14000/0.25J | 14000 | 950 (24 Pulse) | 9460 | 14000 | 11600 | 1200 | 19~21 | 150~200 | 3400 | 0.1~0.15 | 0.25~0.3 | 25 | 600-550 |
| 27 | GW-30-16000/0.2J | 16000 | 950 (24 Pulse) | 10850 | 16000 | 13300 | 1200 | 21~23 | 150~200 | 3400 | 0.1~0.15 | 0.25~0.3 | 30 | 600-550 |
| 28 | GW-40-20000/0.2J | 20000 | 950 (24 Pulse) | 13545 | 20000 | 16600 | 1200 | 25~27 | 150~200 | 3400 | 0.1~0.15 | 0.25~0.3 | 40 | 600-550 |
| 29 | GW-50-22000/0.2J | 22000 | 950 (24 Pulse) | 14932 | 22000 | 18300 | 1200 | 25~28 | 150~200 | 3400 | 0.1~0.15 | 0.25~0.3 | 50 | 600-550 |
Note:
(1) GW - means medium frequency induction furnace, - 1 - means induction furnace capacity of 1 ton, - 500 - means furnace rated power of 500 KW, / 1 - means furnace operating frequency of 1000 Hz, / 0.5 - means melting furnace frequency of 500 Hz, - J - means hydraulic tilting furnace (furnace shell is steel shell), - JJ - means mechanical tilting furnace. (the shell of the furnace is aluminum alloy).
(2) The above quoted price is for routine configuration. Other configurations can be added, such as leak alarm, water temperature alarm, furnace switch, cover mechanism, lining ejector and transformer, cooling device (open and close cooling tower, closed cooling tower, plate heat exchanger)
3) If necessary, send technicians to carry out the commissioning: the domestic section is free; the overseas section travel expenses, accommodation and food are borne by the user and each person is subsidized 150 US dollars per day.
4) I quote EX-W at a price including simple packing, including shipping charges to Shanghai port area and all inland charges in China.
V) The above electric furnace voltage levels are 380V, 690V and 950/1000V, and the frequency is 50HZ. If the user equipment requirements are different from the above voltage levels and frequencies, each item needs to be increased by 15000USD.
