PD40 PD28 PD90
F=6-16
27-64mm
500-1000mm/Min
250mm
3m
1.8m3-3.2m3
90kg
1.2t
Drilling Rig
PRODRILL
Standard Package
CE, SGS
China
8430390000
Product Description
Excavator Mounted Drill Rig attachments are designed to be used in various job sites such as drilling and blasting, quarrying & Mining, rock bolting, rock and concretre demolition, construction works, etc. ProDrill rock drills' percussion hour to engine hour ratio is exceptionally good at 60 %, which is substantially higher than what can be achieved with conventional drilling rigs. This is best proven in difficult conditions where other solutions fail to drill holes without the exceptional reach of the excavator's boom.
Besides demanding conditions, ProDrill Excavator Mounted Drill Rig can also be used as hydraulic rock splitter to demolish over sized rock bad and huge concrete building removal.
1. Hydraulic Excavator Mounted rock drilling Rig for borehole drilling
1 meter per Min
Excavator mounted rock drilling attachments are designed to be used in various job sites such as drilling and blasting, quarrying & Mining, rock bolting, rock and concretre demolition, construction works, etc. ProDrill rock drills' percussion hour to engine hour ratio is exceptionally good at 60 %, which is substantially higher than what can be achieved with conventional drilling rigs. This is best proven in difficult conditions where other solutions fail to drill holes without the exceptional reach of the excavator's boom.
A. QL-Y90 EXCAVATOR MOUNTED HYDRAULIC DRILL RIG
FOCUS ON BIG HOLE
2-3/, . QL-Y90, 38-89mm, , QL-Y90. Excavator Mounted Drill Rig
Drilling speed can up to 2-3 meters per minute, but don"t need a big compressor.
The drill hole diameter of QL-Y90 excavator mounted hydraulic drill rigrange from 38 to 89 mm, it is the best choice for the big hole.
B. QL-Y45 EXCAVATOR MOUNTED
HYDRAULIC DRILL RIG
| products type | PD-Y90 |
| available rigidity rock | F=6-20 |
| drill scope | 38-89mm |
| drill speed | 500-1000mm/min |
| lowest horizontal hole height | 250mm |
| once propel travel | 3m |
| oil pressure | ≤19Mpa |
| compressor type | 1.8m3-3.2m3 |
| size | 7488*140*252mm |
| drifter weight | 115kg |
| whole weight | 1.2t |
