CY-1350X-ISE
0.7ml
S Type
1/4 Inch
1350c
Thermal Evaporator
One Year, 1 Year
Ce/TUV
Electrostatic Spraying Equipment
Hardware Spraying Equipment
Powder
CE
Automatic
New
Online Video
CY
Wooden Box
1350C
Zhengzhou, China
8543709990
Product Description
1350C In-Situ Evaporator with KF50 Flange, Optional Magnetic Fluid Sealed Inline Swivel, and Temp controller for PVD Processes - CY-1350X-ISE
CY-1350X-ISE is a temperature controlled thermal evaporator designed for In-situ evaporating most metallic and organic materials up to 1350C. The optional magnetic fluid seal is an inline swivel which prevents gas/vacuum / electrical lines twisting in the event of tube & flange rotation. The KF50 rotatable flange had a wide range adaptability to vacuum chambers and tube flanges. The unit also provides an inlet valve for inert gas purging or evacuation. This helps to protect samples from moisture or oxygen exposure for the entire coating process.
CY-1350X-ISE is a temperature controlled thermal evaporator designed for In-situ evaporating most metallic and organic materials up to 1350C. The optional magnetic fluid seal is an inline swivel which prevents gas/vacuum / electrical lines twisting in the event of tube & flange rotation. The KF50 rotatable flange had a wide range adaptability to vacuum chambers and tube flanges. The unit also provides an inlet valve for inert gas purging or evacuation. This helps to protect samples from moisture or oxygen exposure for the entire coating process.
| Structure & Features | Manual - Auto dual model control. Manual control over the current provides a faster initial heating up but might lose accuracy during the temperature holding. Auto mode is a good compensation for that. KF50 rotatable adaptor with quick clamp enables easy installation onto vacuum chamber and tube flanges. The magnetic fluid sealed inline swivel prevents gas/vacuum / electrical lines twisting in the event of KF50 flange rotation. (Optional, please select the features in the optional bar) Tungsten coil heater and alumina crucible for high-temperature evaporation up to 1300 ºC. Precision temperature control with 30 programmable segments and +/- 1 ºC accuracy. 1/4'' tube fitting with needle valve is built-in for gas purging or evacuation. |
| Input Power | Input voltage: 208 - 240 VAC 50/60 Hz, single phase, 500W Power cable included without the plug |
| Temperature Control & Heaters | Working temp: 1350ºC Max(<1hrs)., and 1200ºC for continuous heating. S type thermocouple is included. Tungsten coil heater with the S type thermocouple is inserted to the bottom of alumina crucible for precise temperature measurement and control. Temperature control console provides up to 30 segments programmable with +/- 1 ºC accuracy. 500W DC evaporation power supply with max. operating current @ 30Amps. The time settings of temperature controller are in seconds. Recommend to limit the temperature heating/cooling rate to < 30 ºC/min. For continuous heating above 800 ºC, alumina fiber must be used to fill the gap between the refractory liner and crucible. It is important to bury the tungsten coil to prevent heat dissipation |
| Sample Crucible | 0.7ml alumina crucible with tungsten heating coil surrounded. S type thermocouple inserts for accurate temperature measurement of the source material. |
| Gas Inlet | 1/4'' tube fitting is built in for chamber purge or forming gas processing One needle valve is built-in to control gas flowing rate |
| Compliance | CE Certificate |
