This manual powder coating plant including the manual powder coating machine ,powder spray booth,electric powder coating oven,it can finish the coating ,curing parts of the process,and save powder
Powder coating machine:COLO-800D-L2
providing powder coaters with the same three pre-programmed modes as the COLO-800D
Series - Coating Mode, Re-coat mode, Corner mode.
The Colo-06 manual powder gun is lightweight and well balanced to provide the highest
level of operator comfort for increased productivity.
A wide selection of spray nozzles,and extensions provides the ability to quickly adapt to
specific or unique applications.
| power range | 220v |
| Frequency | 50/60HZ |
| Temperature range in use | -10 +50 |
| Gun weight: | 500g |
| Rated output voltage | 24VDC |
| Rated output voltage | 24VDC |
| Input voltage | - 200kv |
| Maximum output current | 180Ua(max) |
| Maximum output voltage | 0-100KV ( adjustable) |
| Maximum powder injection | 600g/min |
| Polarity | negative (-) |
| Maximum input-air pressure | 8kg/cm |
| Optimum input-air pressure | 6kg/cm |
Electric heating powder coating oven:Colo-1818
electric heating: convenience, low cost equipment, the use of high cost suitable for small
output workpiece.
| Model | colo-1818 |
| Worksize dimensions | 1800 width x 1800 height x 1800 depth |
| Overall dimensions | 2100 width x 2030 height x 2000 depth |
| Power supply | Electric/ 15kw |
| Voltage/Frequency | 380V/220v(50-60hz) |
| Warm-up time | 15-30 min. (180° C) |
| Temperature stability | < ± 1-3°C |
| Temperature max. | 250° C |
| Fan motor | 0.75kw |
| Warranty | 12 months |
1.Rock wool sandwich panel,100mm thick.Powder Coating Oven Outside is colorful steel,
powder curing oven inside is gavalnized steel, anti-flame and heat-insulation
2. furnaces for polymerization equipment compact structure, solid and durable, good sealing insulation
3. Automatic control them completely, without staff on duty
4.Specifications and configuration of the above devices can be manufactured according to customer demand.
COLO-S-2315 Spray Booth with Single-stage Filter Recovery
New spray booth you can notice that the electric control can move, when you finished the spray work, then move it to the outside.
Durable, long-life powder-coated steel structure with high-quality galvanized canopy and floor
Low-profile booth base eliminates operator platforms
Requires only quick, easy conncet electrical and pneumatics to start production
| Model | COLO-S-2315 |
| Booth Type | Closed |
| Operator dimensions | D1500*W2300*H1500mm |
| Overall dimensions | D2070*W2750*H2180mm |
| Weight | 450kg |
| Power supply | Electric |
| Nominal power | 4kw |
| Voltage | 380V 3PHASE |
| Frequency | 50-60Hz |
| Filters | Polyester |
| Filters count | 4(325*900) |
| Filters hang type | easy for change |
| Filter cleaning system | Pneumatic |
| Air consumption | 6677-13353m3/h |
| Warranty | 12 months |
Applications:
Our company
recovery systems, spray booth, conveyor systems, pretreatment plants. Also supply powder
coating,powder filters, equipment for powder coating, painting guns, pumps and their equipments.
Our Service
1. Before-Sale Service
Before your purchase, our engineers, who has more than 10 years in the field of powder coating,
Will have a complete communication with you, to get a full understanding of your coating requirem
-ents. We'll make a detailed quotation and layout plan based on your actual production conditions.
We not sell powder coating line, we are doing Your surface treatment equipments.
2. After-Sale Service
Our after-sales service team provides comprehensive support and assistance for colo's customers worldwide, not only during the installation and test tuning period of our powder coating line, but also during its entire service life. Highly qualified technicians are available to make service visits to custo
-mers and to carry out maintenance
3. Spare Parts
Spare parts are available, and can be purchased, for all equipment supplied by COLO. A team of experienced engineers will give advice and provide assistance in handling spare parts requirements. Please always state the reference number of the relevant equipment when making an inquiry
4. Training Of Customers
Colo offers comprehensive training to ensure optimum operation and maintenance of our powder
Coating line.
Any question,pls contact us !!!
