COLO-3180
220V/380V
12 Months, 12 Months
Electrostatic Spraying Equipment, Electrostatic Spraying Equipment
Powder, Powder
CE, ISO, CE, ISO
Manual, Manual
New, New
Yes
Mental Powder Coating, Mental Powder Coating
Flexible
Assembly
Non Automation
Intelligent Manufacturing
Non Flow Production Line
Product Line
Powder Painting Drying
Manual
3000X1800X1800mm
15 Days
CE
Yes
HICOLO
Wooden Carton
CE
China
8424899990
Product Description
Batch industrial powder drying oven furnace with CE
We are a leading Brand in the field of offering clients precision designed and optimum functionality based range of Spray booth and Curing Ovens.
These ovens are widely appreciated for features like precision engineering, high efficiency as well as corrosion resistance features.
This Powder drying furnace suit for large or long items like goods shelf.
Technial Data:
Installation and operation of Electrostatic Powder Curing Oven
1, Make sure the ground is level.
2 Clean the inner of the oven, close the door.
3 Make the workpieces which will to be cure ready. About half an hour.
4 Set the temperature as you required, normally for 180°C-200°C. set the time you need to cure, such as 25 minutes (this will according to thickness of your workpiece, if for thin,then 20mins,for thickness about 25mins).open the door, push the workpieces into the oven,close the door.
5 Turn on the power switch,and then press the bottom of turn on
6 After the temperature reach to the value we setted, the time will begin to change.(you don't need to operate, it is automatic change )
7 When hear the bell ring, press the bottom of turn off ,push out the workpiece which has been cured. Push into the next batch.
8 Please lift down the the workpiece which from the oven after cured ,after it will be cooled.
We also produce powder coating spray booth, powder coating machines, and powder spray gun. Here some pictures for your reference to know more about our company.
Please contact Charlene for more information!
We are a leading Brand in the field of offering clients precision designed and optimum functionality based range of Spray booth and Curing Ovens.
These ovens are widely appreciated for features like precision engineering, high efficiency as well as corrosion resistance features.This Powder drying furnace suit for large or long items like goods shelf.
Technial Data:
| Worksize Dimenstions | 1800x1800x3000mm |
| Over Dimensions | 2150x2100x3250mm |
| Power Supply | Electric/30KW |
| Voltage/Frequency | 380v/220v (50-60Hz) |
| Warm up time | 15-30mins (180 °C) |
| Temperature stability | < ± 3-5°C |
| Ventilation performace | 1133-2565m3/h |
| Motor power | 1.5KW |
| Circulation/Air flow | Vertical,variable through holes on the walls |
Installation and operation of Electrostatic Powder Curing Oven
1, Make sure the ground is level.
2 Clean the inner of the oven, close the door.
3 Make the workpieces which will to be cure ready. About half an hour.
4 Set the temperature as you required, normally for 180°C-200°C. set the time you need to cure, such as 25 minutes (this will according to thickness of your workpiece, if for thin,then 20mins,for thickness about 25mins).open the door, push the workpieces into the oven,close the door.
5 Turn on the power switch,and then press the bottom of turn on
6 After the temperature reach to the value we setted, the time will begin to change.(you don't need to operate, it is automatic change )
7 When hear the bell ring, press the bottom of turn off ,push out the workpiece which has been cured. Push into the next batch.
8 Please lift down the the workpiece which from the oven after cured ,after it will be cooled.
We also produce powder coating spray booth, powder coating machines, and powder spray gun. Here some pictures for your reference to know more about our company.
Please contact Charlene for more information!
