colo=900T-C
12 Months
Manual and Portable
for Powder Coating Producer or DIY Coating Job
150 Ml (Approx. 90 G of Powder)
30 - 400 G/Min
1, 8 - 4 Nm3/H
130 G
66mm
Electrostatic Spraying Equipment
Powder
CE, ISO, ISO9001, CE
Manual
New
Mental Powder Coating
Yes
COLO
Carton Packing, 10kgs Per Unit
CE
China
8424899990
Product Description
500ml Small Powder Coating Guns
COLO-900T-C powder coating unit Provides unsurpassed operator control, coating efficiency and ease of use.
No matter what your application needs, HICOLO has the right powder coating solution for you!
Application cup for COLO-900T-C manual powder gun
The application cup is built exclusively for electrostatic coating with organic
Powders. Any other use is considered as non-conform.
The application cup is especially suited for manual coating very small series,
Test coatings at powder manufacturers, and for laboratory tests.
The powder types used are to be fluidized without vibration.
Typical characteristics
- The application cup is especially suited for working with minimum
Quantity of powder
- Precise application parameters lead to repeatable application
Performances
- The application cup enables a very quick color change
- The application cup can be connected to an COLO coating unit
Colo-06 powder gun by quick release connection - no extra device necessary
Maintenance and cleaning
Note:
Regular and conscientious maintenance increases the operating life
Of the unit and ensures a longer, more constant coating quality
1. Empty any powder out of the application cup
2. Clean the gun and the outside of the application cup by blowing
Off, wiping etc.
3. Release the bayonet closure between cup cover and cup
4. Clean the cup
5. Pull out the dip tube and clean it
6. Clean the cup with compressed air
COLO-900T-C powder coating unit Provides unsurpassed operator control, coating efficiency and ease of use.
No matter what your application needs, HICOLO has the right powder coating solution for you!
Application cup for COLO-900T-C manual powder gun
The application cup is built exclusively for electrostatic coating with organic
Powders. Any other use is considered as non-conform.
The application cup is especially suited for manual coating very small series,
Test coatings at powder manufacturers, and for laboratory tests.
The powder types used are to be fluidized without vibration.
Typical characteristics
- The application cup is especially suited for working with minimum
Quantity of powder
- Precise application parameters lead to repeatable application
Performances
- The application cup enables a very quick color change
- The application cup can be connected to an COLO coating unit
Colo-06 powder gun by quick release connection - no extra device necessary
Maintenance and cleaning
Note:
Regular and conscientious maintenance increases the operating life
Of the unit and ensures a longer, more constant coating quality
1. Empty any powder out of the application cup
2. Clean the gun and the outside of the application cup by blowing
Off, wiping etc.
3. Release the bayonet closure between cup cover and cup
4. Clean the cup
5. Pull out the dip tube and clean it
6. Clean the cup with compressed air
| Workpieces type | Output voltage | 1ST air | 2nd air | Painting distance |
| Big size new | 80-100kv | 4-6kg/cm2 | 2-3kg/cm2 | 15-20cm |
| Corner,sides | 40-60kv | 2-3kg/cm2 | 0.5-1 kg/cm2 | 10-15cm |
| repaint | 20-30kv | 2-3kg/cm2 | 0.5-1kg/cm2 | 15-20cm |
