OURS88i
Hardware Spraying Equipment, Metal Finishing
1 Year
as Per The Client
High Pressure Airless Spray Equipment
Paint
CE, ISO
Manual
New
Online Support Service
jsours
Carton
CE, SGS
China(Mainland)
8424200000
Product Description
OURS Coating Series Airless Paint Sprayer
Product description:
Durable,good spraying effect.
Product description:
Durable,good spraying effect.
Can spray more variaties of paint than the general sprayer. Good for spraying interior paint, and part of the exterior paint (831,841 paint etc.). It allows good and even applicatioin of ordinary paint, and some special paint.
OURS680i airless sprayer supports big muzzle and wide muzzle, greatly enhance the efficiency of spraying. So you can quickly complete a good spraying operations and enjoy your life.
OURS880i airless sprayer, has 31.2% enhanced plunger stroke, greater flow,and higher efficiency.
Advantages:
1. High spraying efficience
2. High-quality coating
3. Prolonging the life of the coating
4. Spraying with no dead corner
5. Saving the coating
Technical parameter
Motor Power: 1600W
Voltage Frequency: 220V 50HZ
Maximum output pressure: 22MPa
Maximum unloading flow: 3.5L/min
Maximum injection flow: 3.2L/min
Nozzle diameter: 0.27mm-0.15mm
Best spray distance: 350-450mm
Spray width: 250mm-600mm
Voltage Frequency: 220V 50HZ
Maximum output pressure: 22MPa
Maximum unloading flow: 3.5L/min
Maximum injection flow: 3.2L/min
Nozzle diameter: 0.27mm-0.15mm
Best spray distance: 350-450mm
Spray width: 250mm-600mm
Operating principle:
Pressurizing the paint by the plunger pump, and the paint will be transported to the gun through the high pressure flexible hose and be the paint mist by the pressure of the nozzle, then form the compact coating on the surface of the workpiece.
Spare parts:
| Motor | PMDC motor,220V,50HZ,Single phase |
| Pressure rotary knob | Control the delivery pressure of coating (Clockwise: increase the pressure, anticlockwise: degrease the pressure) |
| Power switch | To control the unit to start or stop |
| Reflux switch | Turn on the reflux valve------(Flow state: horizontal state or wind anticlockwise) Turn on the reflux valve------(Spray state: vertical state or wind clockwise) |
| Lubrication hole | PSL sealing oil or advanced 45# sewing machine oil adding place |
| Coating sucking pipe | Sucking up the coating from the coating barrel into equipment |
| Reflux pipe | The coating or solvent discharge here when it is at reflux state |
