Ventilation of the sanding booth
LONGXIANG sanding booth has several ventilation systems which provide better painting conditions. All the filter systems and air exhaust systems underneath create a efficiently vertical air flow; and this air flow distribute inside of the booth evenly; then this air flow make overspray removing away from the vehicle immediately and completely.
Air recirculation on baking model
100% of the air produced by the fan is transported into LONGXIANG sanding booth during the baking model; and only 15%-20% is expelled outside which means the balance 85%-80% is recovered and filled up with fresh air by means of the changeover damper.
The inner temperature of the LONGXIANG sanding booth raises rapidly; Then the heating system will power off at once when it reaches at baking temperature, this will save more energy.
Lighting
The lighting system is provided by four*16W light fixed in the ceiling panels and side walls. They are sealed with 5mm tempered safety glass. LONGXIANG spray booth lighting system is able to supply enough lighting with lower energy consume safely.
Filters
The filtering system is made up by high-efficiency filters. The filers hold higher dust retention capacity and lower resistance to the air passage. The long life designing reduces frequency of replacement, which is contributing to reductions in running costs.
Warranty
Our equipments except quick-wear-parts are guaranteed for 12 months from the date of receipt, and the filters and lamps are quick-wear-parts.
| LX-2-3 | |
| Inside size | 6300×3450×2800mm (L*W*H) |
| Outside Size | 7550×3550×3200mm (L*W*H) |
| Basement system | Without; |
| Ceiling system | 6400×3550×380mm (L×W×H),There are lights on both sides, two -thirds of the top of the top are equipped with filter cotton, and one -third of the rear side is equipped with sealing board; |
| Generator Setting Type | Rear Exhaust,The air outbox is made of the steel plate of the spraying profile and the external protective film, which improves the anti -corrosion and rust resistance and extend the service life. |
| Exhaust air system | The size of the cabinet is 2290 × 1200 × 1800mm (L × W × H), and the oversized fans can fully meet the needs of the polishing room exhaust; with a 7.5kW YDW series fan exhaust, the air volume is 20000m³/h, the volume is small, the air volume is large, the air volume is large, the air volume is large, and the air volume is large. Low noise and small vibration; heat -resistant moisture and durability. Electric damper control displacement exhaust volume. |
| Seal Type | Back side set 50mm EPS, other 3 sides with PVC soft curtain,The color of the curtain: white, transparent in the middle, blue below. |
| Ceiling Installation | Steel rope hanging or steel pole supporting the roof(Option). |
| Filtering System | G2 level, filtering effect> 83%, which is the production of Italian technology, effectively capture dust particles greater than 10um, EU5 level efficient filtering, which is produced by Dutch technology.effectively capture dust particles greater than 4um,filtering effect≥ 99% Filtering cotton bracket, convenient for changing filter cotton, multi -layer glass fiber cotton, filtering effect> 70%, adsorbing dust and particulate matter in the paint fog. |
| Lighting System | 8pcs*4units*16w LED lighting .Galvanized plate spraying light box shell, 3C quality certification tempered glass high -transmitting panel. |
| Control System | Fan switch,lighting,air damper. |
| Voltage and Frequency | 380V,3Phase,50HZ . |
| Total Power | 8.7 KW. |
