Dh 32/Dh40 Drilling Machine

DH Drilling Machine

>  DH32
   
· Drilling, tapping, boring, reaming
· Strong column, vice table, gear drive, lower noise
· Heavy-duty tapered roller bearing spindle, positive spindle lock
· All gears are haedened and ground
· Machanical safety device for headstock
· Easy to change auto feed

Standard Accessories:
>  Draw bar
>  Adapter
>  Taper shank for drilling chuck
>  Drilling chuck
>  Arbor
>  T slot bolt
>  Washer
>  Nut
>  Tilted wedge
>  Spanner
>  Oil gun

Optional Accessories:
>  Vices

>  DH40

· Drilling, tapping, boring, reaming
· Gear driving and strong cutting power
· 2 speed strong power motor, wide range speedc change
· Electric system according to IEC standard, equipped with short cut and overload protection
· Automatic tools ejectors, equipped with cooling system and tapping mechanism
· 2 steps power feed 0.1-0.2mm/rev

Optional Accessories:
>  "T"-Tilting worktable
>  "L"- L type worktable

Technical Parameters:

Model No.	Unit	DH 32	DH 40
max. drilling capacity(iron/steel)	mm	35(1.38")	45(1.77")
max. tapping capacity(iron/steel)	mm	22/20(0.79"/0.79")	22/24(0.87"/0.94)
spindle taper		MT4	MT4
worktable size	mm	460×460(18.11"×18.11")	560×560(22.05"×22.05")
dimensions of base	mm	620×540(24.41"×21.26")	735×510(28.94"×20.08")
spindle travel	mm	160(6.23")	180(7.09")
distance spindle center to column surface	mm	300(11.81")	350(13.78")
spindle nose to worktable	mm	720(28.35")	770(30.31")
spindle nose to base	mm	1200(47.24")	1215(47.83")
column diameter	mm	125(4.92")	150(5.91")
spindle speeds range(optiona)	rmp	12steps: 75~3200	18steps: 50~1450
spindle power down feed	mm/r	0.06/0.12/0.18	0.1/0.2
motor	kw	1.5/1.1	0.85/1.5
N.W./G.W.	kg	350/400	540/600
packing size(L×W×H)	mm	2200×540×750	2270×580×1100
20' Container	sets	24	20