3000GPH
1 Year
1 Year
2501-3500GPH
5-10A
ISO9001:2008, RoHS, ISO9001:2000, CE, Ukca
12V
Anti-Airlock,Ignition Protected
29mm/ 1-1/8 Inch
Thermopliastic
Water Cooled Motors to Extended Life
Intermittent
Inland and Coastal Boats
ABS
Deltech
Cartons
CE
China
8413
Product Description
Model: AD3000-12/AD3000-24
Flow Rate: 3000GPH
Head: 8M
Voltage: 12V/24V
Current: 10A/6A
Wire Head: 100CM
Output Fittings: 29mm
12V Bilge Pump
Product Description
1. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
2. Totally submersible and ignition protected.
3. To all existing safety standards.
4. Water cooled motors for long life, with anti airlock design and moisture tight seals.
5. Snap-lock strainer base for easy installation and removal, and silent vibration free running
6. Includes comprehensive user manual with installation instructions and wiring diagram
Application
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use
How a Bilge Pump Works
Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.
Flow Rate: 3000GPH
Head: 8M
Voltage: 12V/24V
Current: 10A/6A
Wire Head: 100CM
Output Fittings: 29mm
12V Bilge Pump
Product Description
1. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
2. Totally submersible and ignition protected.
3. To all existing safety standards.
4. Water cooled motors for long life, with anti airlock design and moisture tight seals.
5. Snap-lock strainer base for easy installation and removal, and silent vibration free running
6. Includes comprehensive user manual with installation instructions and wiring diagram
Application
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use
How a Bilge Pump Works
Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.
