(one gun or two gun)
EV charging station description
This EV charging station is charged by DC, charging speed is fast.
(according to different battery capacity and BMS system);
Support remote monitoring and maintenance;
The built-in touch screen is easy to opearate;
User authentication is convenient, and it supports multiple methods such as scan code/swipe card identification.
The product is safe and reliable, which has high temperature monitoring function, and automatically cut off in abnormal situation , and supports electrical, software, hardware multi-redundant intelligent security protection;
The environmental adaptability is strong, and the extreme cold and heat condition can stabilize the work.
Quick and easy installation;
Intelligent operation, saving manpower;
Small work noise.
EV Charging station specification
| Type | PC-DC-60kW/750V-Q2 | PC-DC-120kW/750V-Q2 | PC-DC-160kW/750V-Z7 | PC-DC-240kW/750V-Z7 |
| Rated Power | 60kW | 120kW | 160kW | 240kW |
| Output current | 0~100A | 0~200A | 0~250A | 0~250A |
| Output voltage | 200~750VDC | |||
| Input voltage | 380VAC±15% | |||
| Input frequency | 50Hz | |||
| Noise control | <65dB | |||
| Working elevation | <3000m | |||
| Operating temperature | -30ºC~+55ºC | |||
| Working humidity | 5%~95% non-condensing cream | |||
| Dimension | 600mmx750mmx1750mm | 700mmx730mmx1650mm | ||
| Cable Length | 5m (optional) | |||
| Protection level | IP54 | |||
| Security function | Overvoltage, undervoltage, overcurrent, short circuit, surge, leakage, etc | |||
| Case material | galvanized steel sheet | |||
| Voltage regulation accuracy | ≤±0.5% | |||
| Steady flow accuracy | ≤±1% | |||
| Ripple coefficient | ≤±0.5% | |||
| Power factor | 0.99 | |||
| Harmonic content THD | ≤ 5%(>50%load) | |||
| Effectiveness | 95% | |||
| Payment methed | Credit card payment/ Scan code payment | |||
| Auxiliary power supply | 12V or 24V | |||
| Safty standed | IEC 62196, SAE J1772 | |||
EV Charging station advantage
First: hardware
1. Touch button panel
Rockwill EV Charging Station adopts high-quality touch panel, which obviously has the advantages of high, large and superior, long service life, better waterproof and sun protection performance, and can be used for a long time indoors and outdoors. (Applicable to various fast charging scenarios such as bus stations, logistics and rental stations, commercial real estate, highways, etc.
The physical buttons used in ordinary charging piles will have various problems such as internal rust, poor contact, and buttons not resetting in a short period of time. The external film is also very easy to fall off, let alone waterproof.
2. Stainless steel case, galvanized sheet case
(1) Hard type: Stainless steel is a very expensive material, and the requirements of the manufacturing process are also very high. The toughness of stainless steel is also the highest. The toughness of the case made of stainless steel is much higher than that of the iron plate case.
(2) Corrosiveness: stainless steel is not easy to produce corrosion, pitting, rust or abrasion. The galvanized sheet cabinets are all treated by pickling, phosphating, and electrophoresis, and then painting and printing, which is durable.
3. High withstand voltage and high current relay (can charge all electric vehicles of all sizes)
The relay is the main component in the control circuit. The size of the power directly affects the size of the output load. The single-circuit power of the relay used in this product is greater than 3KW. Because of this, it is suitable for electric two-wheeled, three-wheeled, four-wheeled, and electric vehicles. It can be charged normally.
The actual power of the traditional control relay is 200W, which can only charge ordinary two-wheel and small three-wheel electric vehicles.
4. Leakage and overcurrent protection
This product is equipped with a leakage and overcurrent protection switch. When the leakage current is greater than (usually 30mA, which is a human body safety current), the switch will trip and cut off the power to prevent people from getting an electric shock due to a short circuit. When the load is short-circuited, The switch will also trip due to excessive current.
5. High-power metering chip
Each channel contains a set of power measurement system to accurately measure the value of the power consumption of the channel.
This core system technology is not available on all traditional charging piles
1. Billing method (billed according to power consumption)
Because this product has a power metering device, it can be billed accurately according to the power consumption (that is, how much power is used, how much the device deducts according to the set rate), which is a humanized and reasonable billing method.
However, traditional charging piles are deducted according to the time. Because the load power varies during working hours (excessive power will burn the fuse or the over-current circuit protection will cause the equipment to not work properly), this charging method is neither accurate nor It is unscientific and unreasonable, so multiple disputes may arise with the owners.
2. Rate adjustment
Rate adjustment is to set the amount of electricity per kilowatt-hour. This value can be set by the equipment manager at any time according to their own requirements. It has the characteristics of convenient adjustment, simple operation, and safe use.
3. Fully automatic stop
When the battery of the electric vehicle is fully charged or when the charging is ended by someone on the way, the device will automatically end the charging.
4. Power-off memory
The power-off phenomenon occurs during the charging process, and the device will return to the working state before the power-off after the power is turned on.
EV DC Charging Plug 
EV Charger Products
Rockwill ev charging station is strictly design and produce according to the SAEJ1772 and IEC 61851 standard.We choose the international high quality components as raw material, ensure the charger stable performance, safe and the long service life of the charger. Instead of using the inferior components. Because poor quality ev charger will bring many additional invisible operation and maintenance costs. Especially for EV operators, Once the ev charging station installed, it will service for many electric vehicles, so a stable & safety and real high efficiency charging station is important to them, so we always believe one good quality charger can bring more profit to them.
What after service you support of EV Charger?
2 Year warranty and while service life technical support.
During the warranty time, we provide comprehensive technical support.In normal conditions, we provide after-sales technical training by providing written training materials or videos, also we support online remote technical service. If there is a urgent situation, we will also send our professional technicians to provide local on-site support.
And we supply "One time purchase, lifetime service" , even the ev charger which you buy is out of warranty time, you also can contact us to get in time service support.
How to choose the connector?
CCS1: also know as Combo ccs type1 or Combo CCS-1. This is the dc fast ev charging standard North America market., Typical EVs: Chevy Bolt.
CCS2: also know as Combo ccs type2 or Combo CCS-2. This is the dc fast ev charging standard for Europe. Typical charging EVs: BMW i3, VW e-Golf, Porsche Mission-e.
CHAdeMO: DC fast charging standard for Japan, Typical charging EVs: Nissan Leaf. Chademo ev charger also can charge Tesla EVs with CHAdeMo adapter..
Scope of application
Integrated DC charging pile is suitable for urban public charging stations (bus, taxi, official car, sanitation car, logistics car, etc.) city public charging station (private car, commuter car, bus) cityVarious parking lots in residential areas, shopping plazas, power business places, etc.; intercity highway charging stations, etc.
Packing & Shipping
