Model NO.
PC-AC/DC
Protection Level
IP54
Voltage Regulation Accuracy
0.5%
Output Voltage
AC & DC
Input Voltage
220V & 380V AC
Frequency
50/60Hz
Auxiliary Power Supply
12V or 24V
Safety Standed
IEC 62196, SAE J1772
Transport Package
Standard Packaging
Trademark
Rockwill & Customization
Origin
China
HS Code
8528591090
Production Capacity
200sets/Month
After-sales Service:
24 Months
Type:
Fast EV Charging Station
Certification:
ISO, CCC, RoHS, CE
Warranty:
24 Months
Noise Control:
≤65dB
Cooling Method:
Forced Air Cooling
EV charger description
Rockwill EV charger station adopting a nuclear power-grade high-power power module platform, the safety and reliability are higher;The new high-efficiency three-phase PFC circuit topology is adopted, the power factor is greater than 0.99, and the harmonic distortion rate is ≤5%.
The high-frequency switching power supply module adopts full-bridge phase-shift soft-switching technology, and the execution efficiency is high.Intelligent charging process control and perfect charging process monitoring and protection, fool-like operation;A variety of charging methods such as timed charging, quantitative charging, fixed amount charging and automatic charging are available;Real-time display of information such as the amount of charge, charging time, current electricity price, charging price, and operating status;The RS-485 networking communication interface can be reserved, and the optional GPRS networking mode can be provided;Module hot swap technology makes maintenance more convenient.
EV charger specifications
7/22kW Wall-mounted/ Floor-stand AC EV chaging station
| Type | PC-AC-7kW/220V-J3 | PC-AC-22kW/220V-J3 |
| Rated Power | 7kW | 22kW |
| Oupput current | 0~32A | 0~32A |
| In/ Output voltage | 200VAC±15% | 380VAC±15% |
| Input frequency | 50/60Hz | |
| Noise control | <40dB | |
| Working elevation | <3000m | |
| Operating temperature | -30ºC~+55ºC | |
| Working humidity | 5%~95% non-condensing cream | |
| Cable Length | 5m (optional) | |
| Protection level | IP54 | |
| Security function | Overvoltage, undervoltage, overcurrent, short circuit, surge, leakage, etc | |
| Case material | ABS+PC,flame retardant grade UL94 V-0 | |
| Effectiveness | 99% | |
| Installation method | Wall-mounted/ Floor-stand | |
| Payment methed | Credit card payment/ Scan code payment | |
| Safty standed | IEC 62196, SAE J1772 | |
20/30/40kW Portable DC EV chaging station
| Type | PC-DC-20kW/750V-Z8 | PC-DC-30kW/750V-Z8 | PC-DC-40kW/750V-Z9 |
| Rated Power | 20kW | 30kW | 40W |
| Oupput current | 0~50A | 0~75A | 0~100A |
| Output voltage | 200~750VDC | ||
| Input voltage | 380VAC±15% | ||
| Input frequency | 50Hz | ||
| Noise control | <65dB | ||
| Working elevation | <3000m | ||
| Operating temperature | -30ºC~+55ºC | ||
| Working humidity | 5%~95% non-condensing cream | ||
| Dimension | 520mm×200mm×680mm | 550mmx295mmx455mm | |
| Cable Length | 5m (optional) | ||
| Protection level | IP54 | ||
| Security function | Overvoltage, undervoltage, overcurrent, short circuit, surge, leakage, etc | ||
| Case material | galvanized steel sheet | ||
| Voltage regulation accuracy | ≤±0.5% | ||
| Steady flow accuracy | ≤±1% | ||
| Ripple coefficient | ≤±0.5% | ||
| Power factor | 0.99 | ||
| Harmonic content THD | ≤ 5%(>50%load) | ||
| Effectiveness | 95% | ||
| Payment methed | Credit card payment | ||
| Auxiliary power supply | 12V or 24V | ||
| Safty standed | IEC 62196, SAE J1772 | ||
20/30kW wall-mounted DC chaging station
| Type | PC-DC-20kW/750V-Z6 | PC-DC-30kW/750V-Z6 |
| Rated Power | 20kW | 30kW |
| Oupput current | 0~50A | 0~100A |
| Output voltage | 200~750VDC | |
| Input voltage | 380VAC±15% | |
| Input frequency | 50Hz | |
| Noise control | <65dB | |
| Working elevation | <3000m | |
| Operating temperature | -30ºC~+55ºC | |
| Working humidity | 5%~95% non-condensing cream | |
| Dimension | 520mm×200mm×680mm | |
| Cable Length | 5m (optional) | |
| Protection level | IP54 | |
| Security function | Overvoltage, undervoltage, overcurrent, short circuit, surge, leakage, etc | |
| Case material | galvanized steel sheet | |
| Voltage regulation accuracy | ≤±0.5% | |
| Steady flow accuracy | ≤±1% | |
| Ripple coefficient | ≤±0.5% | |
| Power factor | 0.99 | |
| Harmonic content THD | ≤ 5%(>50%load) | |
| Effectiveness | 95% | |
| Payment methed | Credit card payment | |
| Auxiliary power supply | 12V or 24V | |
| Safty standed | IEC 62196, SAE J1772 | |
60/120/160/240kW DC chaging station
| Type | PC-DC-60kW/750V-Q2 | PC-DC-120kW/750V-Q2 | PC-DC-160kW/750V-Z7 | PC-DC-240kW/750V-Z7 |
| Rated Power | 60kW | 120kW | 160kW | 240kW |
| Oupput current | 0~100A | 0~200A | 0~250A | 0~250A |
| Output voltage | 200~750VDC | |||
| Input voltage | 380VAC±15% | |||
| Input frequency | 50Hz | |||
| Noise control | <65dB | |||
| Working elevation | <3000m | |||
| Operating temperature | -30ºC~+55ºC | |||
| Working humidity | 5%~95% non-condensing cream | |||
| Dimension | 600mmx750mmx1750mm | 700mmx730mmx1650mm | ||
| Cable Length | 5m (optional) | |||
| Protection level | IP54 | |||
| Security function | Overvoltage, undervoltage, overcurrent, short circuit, surge, leakage, etc | |||
| Case material | galvanized steel sheet | |||
| Voltage regulation accuracy | ≤±0.5% | |||
| Steady flow accuracy | ≤±1% | |||
| Ripple coefficient | ≤±0.5% | |||
| Power factor | 0.99 | |||
| Harmonic content THD | ≤ 5%(>50%load) | |||
| Effectiveness | 95% | |||
| Payment methed | Credit card payment/ Scan code payment | |||
| Auxiliary power supply | 12V or 24V | |||
| Safty standed | IEC 62196, SAE J1772 | |||
DC charging & AC charging
1. Charging Speed
Dc charging piles use direct current, while AC charging piles use alternating current, resulting in a difference in charging speed between the two types of charging piles.The charging speed of DC charging pile is faster, while that of AC charging pile is generally slower.Therefore, dc charging piles are generally used for quick charging piles.
2. Appearance
Generally, DC piles are relatively large (because there are a certain number of AC-DC power modules inside, the higher the power, the more modules), while AC piles are relatively small. Secondly, the head is not the same, DC pile charging gun has 9 holes, in addition to PE grounding wire, there are positive and negative dc power supply, CC1, CC2 and so on. AC pile charging gun has 7 holes, generally including L, N AC power supply, PE grounding wire, CC charging connection confirmation and so on.
3. Charging Principles
The DC charging pile directly charges the power battery of an electric vehicle. AC charging pile only provides power output and has no charging function. It needs to be connected to the car charger to charge electric vehicles, which is equivalent to just playing a role of control power supply.
4. Charging Power
The DC charging pile adopts three-phase four-wire power supply system, which can provide enough power and adjust the output voltage and current in a wide range to meet the requirements of fast charging. Power to 40kW, 60kW and higher.
AC charging pile is a power supply device that provides AC power for the on-board charger of electric vehicles (that is, the charger fixed on the electric vehicle). Power to 3.5kW and 7kW in the majority.
5. Installation
AC pile is cheaper and easier to be installed privately, and DC charging pile is generally installed by operating enterprises due to volume, price and other reasons.
6. Influence to Battery
An AC charging pile equalizes the battery pack at the end of the charge phase, ensuring that each cell is as fully charged as possible.Slow charging is mild and helps extend battery life.
The DC charging pile has high requirements on the quality of the battery, and the reaction conditions of the battery under large current are too harsh and severe, deviating from the equilibrium state for a long time. Long-term fast charging will cause a certain loss of the battery life, and the safety factor will decline. Therefore, it is necessary to reasonably match the fast and slow charging. In addition, there will be some components of virtual electricity in fast charging, which cannot reach the nominal driving range of the vehicle.
EV Charger Products
Scope of application Integrated DC charging pile is suitable for urban public charging stations (bus, taxi, official car, sanitation car, logistics car, etc.) city public charging station (private car, commuter car, bus) cityVarious parking lots in residential areas, shopping plazas, power business places, etc.; intercity highway charging stations, etc.
Packing & Shipping
Send Message
