China Vertical Truck Repair Machine Garage Wheel Tyre Changer with CE
Applicable for changing truck and bus tyres whose rim diameter between 14"-42".
| Model | TC 842V Vertical Truck Tire Changer /Tire Changing Machine/ Tire Fitting Machine |
| Rim clamping size | 14-42" |
| Max wheel diameter | 1500mm |
| Max tire Width | 780mm |
| Max Tire Weight | 700kg |
| Working pressure | 130-150 bar (117-145 psi) |
| Voltage | 220V/240V/380V/415V 50Hz/60Hz |
| Bead breaking force | 3300kg |
| Weight | N.W:560kg ; G.W:607kg |
| Certificate | 14 months |
1. The tire removal head can not only install the tire but also remove the tire,breaking the traditional concept of tire removal.
2. The bead bead wheel can also be adjusted freely during work,and there is a ruler for positioning according to the edge of the tire,so as to avoid readjusting the position when the tire is re-installed.
3. The gear box adopts a closed structure,which can effectively improve the service life of the gear,prevent the gear box from being worn due to impurities,and its service life can be increased several times.
4. The hydraulic motor is used in the mechanical transmission part,and the oil pipes thickened,so that the hydraulic motor rotates faster,the power is stronger,and the work efficiency is significantly improved.
5. External aluminum claw cover,fully protect the aluminum alloy steel rim of high-end trucks
6. Hand sand feet are used together, tire removal is more coordinated and efficient than traditional tire removal experience is used.
1. Why is filter-regulator (FRL) so important?
It dry the air so there is no moisture inside pneumatic components. It lubricates the rubber seals to extend its service life. In general FRL is important to maintain long service life of the machine.
2. When working table doesn't turn, how to determine if the problem comes from gearbox, motor or switch?
Disconnect belt and see if the motor can run properly. If not, test the motor itself to see clockwise rotation and anti-clockwise rotation. If motor running properly then the problem is the switch.
We have trouble shooting in details, please contact us for more information.
3. When working table doesn't have needed power to clamp the rim, how to trouble shooting if the problem comes from table cylinder, turning air distributor or pedal valve?
When the cylinder not strong enough, there could be air leaking. The leaking could be on the covers or internal piston. There is a systematic method to trouble shoot, please contact us if you are interested in how to trouble shoot.
You can press " CONTACT NOW " or " CHAT WITH SUPPLIER " to get more details.
Also by other contact ways .
