B657MP
Video Call, Online & Face to Face Service and Trai
14 Months
Off-Car Type
Big Size Wheel
Vertical Type
Dynamic Balance, Static Balance, Wheel Balance, Motorcycle Balance, Calibration Procedure
<70db(A)
New
Customized Color Acceptable
CE Certificate
10-28"
1.5-20"
1000mm
70kg
110V/220V/240V/50Hz/60Hz 250W
15" Steel Rim Wheel
N.W:110.5kg, G.W:126kg
N.W:110.5kg, G.W:126kg
YuanMech
Plywood
100cm*65cm*116cm
Yingkou, Liaoning, China
Product Description
Products Description
FAQ
1. What is the maintenance should be done helper arm?
Firstly use grease to lubricate rail Check an d tight bolts on the sliding frame to decease the clearance. Use grease to lubricate the ro oller shaft and drop center tool thread shaft
2.When working table doesn't turn, how to determine if the problem comes from gearbox, motor or switch?
Disconnect belt and see if the motor can run properly. If not, test the motor itself to see clockwise rotation and anti-clock wise rotation. If motor running properly then the problem is the switch.
We have trouble shooting in details, pl ease contact us for more information.
2. What is the maintenance should be done on swing arm?
Always clean and lubricate the hexagonal shaft to ensure the movement is smooth.Adjust the locking plate to guarantee good locking performance. Tight and decrease the gap between hex shaft and its sleeve. Please contact us if you are interested in more maintenance tips.
Advantage 1 | High-Strength | |||
Advantage 2 | High-Effeiciency | |||
Advantage 3 | User Friendly | |||
Advantage 4 | Cost Effective | |||
Advantage 5 | Quality Assurance | |||
Advantage 6 | CE Approved | |||
FAQ1. What is the maintenance should be done helper arm?
Firstly use grease to lubricate rail Check an d tight bolts on the sliding frame to decease the clearance. Use grease to lubricate the ro oller shaft and drop center tool thread shaft
2.When working table doesn't turn, how to determine if the problem comes from gearbox, motor or switch?
Disconnect belt and see if the motor can run properly. If not, test the motor itself to see clockwise rotation and anti-clock wise rotation. If motor running properly then the problem is the switch.
We have trouble shooting in details, pl ease contact us for more information.
2. What is the maintenance should be done on swing arm?
Always clean and lubricate the hexagonal shaft to ensure the movement is smooth.Adjust the locking plate to guarantee good locking performance. Tight and decrease the gap between hex shaft and its sleeve. Please contact us if you are interested in more maintenance tips.
