M542
Printing Equipment
Variable Speed
Two-Phase
HB-Hybrid
Driving
2
Drive The Stepper Motors
Electromechanical
ISO9001, CE and RoHS
Jk
4.2A
up to 25, 000 Steps/Rev
up to 400kHz.
Signal I/O
JKONGMOTOR
Export Carton
8503009090
Product Description
M series drivers are high performance microstepping driver based on the most advanced technology in the world today. They are suitable for driving any 2-phase & 4-phase hybrid stepper. By using advanced bipolar constant current chopping technique, they can output more speed & power from the same motor, compared with traditional technologies such as L/R drivers. Its patented current control technology allows coil current to be accurately control, with much less current ripple & motor heating.
M542-JK
Features:
High performance, Low cost
Supply voltage to +50VDC, peak current to 4.2A
Automatic idle-current reduction.
Microstep resulations up to 25, 000 steps/rev.
Optically isolated signal I/O
Inaudible 20kHz chopping frequency, highest respond frequency up to 400kHz.
M542-JK
Features:
High performance, Low cost
Supply voltage to +50VDC, peak current to 4.2A
Automatic idle-current reduction.
Microstep resulations up to 25, 000 steps/rev.
Optically isolated signal I/O
Inaudible 20kHz chopping frequency, highest respond frequency up to 400kHz.
| SW5 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 |
| SW6 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 |
| SW7 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 |
| SW8 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 1 |
| Micro | 1/2 | 1/4 | 1/8 | 1/16 | 1/32 | 1/64 | 1/128 | 1/256 | 1/5 | 1/10 | 1/25 | 1/50 | 1/125 | 1/250 |
