70 Frame 15W,12V/24V DC Brush Gear Motor for Digital Printer
Product Description:
Gear Motor-Torque Table Allowance Torque Unit:Upside (N.m)/Belowside (kgf.cm)
•Gearhead and Intermediate gearhead are sold separately.
•Enter the reduction ratio into the blank() within the model name.
•The speed is calculated by dividing the motor's synchronous speed by the reduction ratio. The actual speed is 2%~20% less than the displayed value, depending on the size of the load.
•To reduce the speed beyond the reduction ratio in the following table, attach an intermediate gearhead (reduction ratio: 10) between the reducer and motor. In that case, the permissible torque is 8N-m.
Type Motor/Gearhead | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 |
Speed r/min | 950 | 791 | 570 | 475 | 380 | 316 | 228 | 190 | 158 | 114 | 95 | 79 | 57 | 47 | 38 | 31 | 28 | 23 | 19 | 15 | |
| Z3D30-24GN(3GN3K) | 4GN()RC/ 4GN()RT | 0.16 | 0.20 | 0.27 | 0.33 | 0.46 | 0.55 | 0.76 | 0.92 | 1.10 | 1.53 | 1.80 | 2.20 | 3.05 | 3.30 | 4.12 | 4.95 | 5.50 | 6.60 | 8.00 | 8.00 |
1.63 | 2.04 | 2.75 | 3.37 | 1.69 | 5.61 | 7.75 | 9.38 | 11.2 | 15.6 | 18.4 | 22.4 | 31.1 | 33.7 | 42.0 | 50.5 | 56.1 | 67.3 | 80.0 | 80.00 |
Dimensions(Unit:mm):
Company Information
FAQ
Q: What're your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.
Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge.
Q: What's your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
Please contact us if you have detailed requests, thank you !
