Vitkec 11PC Torque Wrench Labor Saving Lug Nut Wrench Torque Multiplier

1. Max. Torque 1200nm
2. Gear ratio 1:64
3. Square driver 1-3/4
4. With 7pcs socket 24, 27, 30, 32, 33, 36, 38mm
5. Labor-saving wrench is a newly designed wheel wrench for easy loosening truck tires lugs nuts or car tires by using less labor to reach a sufficient output torque without impact or compressor need.
6. The wrench can be used to disassemble various kinds of truck tires the easy way.
7. These are all 1-inch drive sockets, but any 1-inch socket will fit the output shaft of the wrench.
8. Put the sleeve onto the square head of the handle end and the rocking bar on the other end.
9. When the sleeve is put on the net to be disassembled or fastened pay attention to the direction of loosening and tightening. Roll the rocking bar so that the handle is against the side of another bolt tightly.
10. After the nut is unscrewed use the long bar to disassemble quickly. (first, use the long bar to screw on quickly and then use a labor-saving wrench instead during tightening)