471566
Surface Mounted
Negative Temperature Coefficient
Contact
Analog Type
Normal Wirewound
Different Types
Resistance
IP67
RoHS
Customized
471566 Heater Sensor for Pentair Minimax Heater
Pentair Sta-Rite Max-E-Therm Pool and SPA Heaters
10K Ohm
Yellow
1.5m
Screw Type
Temperature Measuring
Rugged and Durable
10kohm
SPA Pool Heater
Tianrui
1000PCS/Package
Customized
China
8409999990
Product Description
The Description of 471566 Yellow Wire Thermistor Sensors Probe 10K Ohm Replacement for Pentair MiniMax Pool Spa Pumps Heaters 
Keep your pool in optimal condition with the Pentair Thermistor Replacement (471566). This model fits specific equipment from the brand, so be sure to check for compatibility first before making any purchase. In addition to Pentair Minimax, this thermistor probe fits ThermalFlo and UltraTemp spa and pool heating pumps. We've revolutionized the pool industry with innovative and high-performance pool pumps, filters, heaters, cleaners, lights, automation systems and more. Each product is expertly engineered and crafted with pool and spa owners in mind, and adheres to our strict standards for quality performance and design.
This Pentair Thermistor Probe fits the following heaters:
*MiniMax NT STD with 6800 Controller
*MiniMax NT STD with DDTC Controller
*MiniMax NT Low NOx with 6800 Controller
*MiniMax NT Low NOx with DDTC Controller
*MiniMax NT TSI with 6800 Controller
*MiniMax NT TSI with DDTC Controller
*ThermalFlo Heat Pump Titanium
*ThermalFlo Heat Pump
*UltraTemp Heat Pump (460932, 460933, 460935, 460936, 460937, 460938, 460962, 460963, 460965, 460967)
Advantages Of The Pentair 471566 Cross Thermistor Temperature Sensor Probe
*100% pure titanium heat exchanger assures corrosion-free performance for extra long life
*LCD control board displays an intuitive, menu-driven readout with easy to follow, full word messages - no more codes.
*AutoSet (time clock over-ride) feature monitors water temperature and turns the water circulation pump on and off as needed to maintain desired pool termperatures
*Automatic defrost feature senses refrigerant temperature and prevents UltraTemp from freezing, allowing the heat pump to operate at even lower temperatures
*Compatible with ALL automated control packages
*Long-life corrosion resistant plastic composite cabinet stands up to severe climates and pool chemicals
*Emerson Copeland Scroll Compressor on 60Hz, single phase models
*ETL listed for safe operation
*Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum effciency and BTU output over a wider operating range
*Highest effciency available, meets or exceeds existing codes and standards
*BTU and effciency performance independently certified by the Air-Conditioning, Heating and Refrigeration Institute, AHRI.
The Details of 471566 Yellow Wire Thermistor Sensors Probe 10K Ohm Replacement for Pentair MiniMax Pool Spa Pumps Heaters Electrical Systems
Application:
For indoor or outdoor installations on pools and spas. Features include an LED temperature readout with dual thermostat controls, temperature safety lockout, and 6-position control panel.
471566 Yellow Wire Thermistor Sensors Probe 10K Ohm Replacement for Pentair MiniMax Pool Spa Pumps Heaters
•HIGH SENSITIVITY
•HIGH RELIABILITY
•HIGH PRECISION
•QUICK RESPONSE
-Applied to water heater, wall stove, ice crusher, baker, oven, microwave, deep fryer, boiler, water heating, etc.
Keep your pool in optimal condition with the Pentair Thermistor Replacement (471566). This model fits specific equipment from the brand, so be sure to check for compatibility first before making any purchase. In addition to Pentair Minimax, this thermistor probe fits ThermalFlo and UltraTemp spa and pool heating pumps. We've revolutionized the pool industry with innovative and high-performance pool pumps, filters, heaters, cleaners, lights, automation systems and more. Each product is expertly engineered and crafted with pool and spa owners in mind, and adheres to our strict standards for quality performance and design.
The Pentair 471566 Heat Pump & Heater Thermistor Probe is a common replacement part for your Pentair MiniMax pool heater
Common MiniMax heater replacement sensor Guaranteed CompatibilityReplaces Pentair 471566 yellow-wire heater sensor
Fits Pentair MiniMax NT STD, NT LN, NT TSI pool and spa heater models 200, 250,300,400,also fits UltraTemp and ThermalFlo pool and spa heat pumps.
This Pentair Thermistor Probe fits the following heaters:
*MiniMax NT STD with 6800 Controller
*MiniMax NT STD with DDTC Controller
*MiniMax NT Low NOx with 6800 Controller
*MiniMax NT Low NOx with DDTC Controller
*MiniMax NT TSI with 6800 Controller
*MiniMax NT TSI with DDTC Controller
*ThermalFlo Heat Pump Titanium
*ThermalFlo Heat Pump
*UltraTemp Heat Pump (460932, 460933, 460935, 460936, 460937, 460938, 460962, 460963, 460965, 460967)
Advantages Of The Pentair 471566 Cross Thermistor Temperature Sensor Probe
*100% pure titanium heat exchanger assures corrosion-free performance for extra long life
*LCD control board displays an intuitive, menu-driven readout with easy to follow, full word messages - no more codes.
*AutoSet (time clock over-ride) feature monitors water temperature and turns the water circulation pump on and off as needed to maintain desired pool termperatures
*Automatic defrost feature senses refrigerant temperature and prevents UltraTemp from freezing, allowing the heat pump to operate at even lower temperatures
*Compatible with ALL automated control packages
*Long-life corrosion resistant plastic composite cabinet stands up to severe climates and pool chemicals
*Emerson Copeland Scroll Compressor on 60Hz, single phase models
*ETL listed for safe operation
*Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum effciency and BTU output over a wider operating range
*Highest effciency available, meets or exceeds existing codes and standards
*BTU and effciency performance independently certified by the Air-Conditioning, Heating and Refrigeration Institute, AHRI.
The Details of 471566 Yellow Wire Thermistor Sensors Probe 10K Ohm Replacement for Pentair MiniMax Pool Spa Pumps Heaters Electrical Systems
Product Name | 471566 Thermistor Sensors Probe |
Fit | Pentair Sta-Rite Max-E-Therm Pool And Spa Heaters Electrical Systems |
Material | Brass |
Resistance | 10K Ohm |
Resistance @25C | 10KOHM |
Cable Length | 1.5M |
Cable Color | Yellow |
Accuracy | High |
R25 | 10kohm |
Housing | Brass- Thread |
Measures | 1-inch length by 2-inch height by 1-inch width |
Probe | Screw Type |
Function | Temperature Measuring |
Certification | ROHS |
Application | Spa Pool Heater |
Fixes symptoms
lf the temperature on your control panel displays incorrect temperature, your thermistor may need to be replaced. Thermistor often displays a temperature that is much too high when it reaches the end of its lifespan.
Easy To Install
Hex head probe provides easy installation into the heater manifold, while plug in connector allows easy port access.
Tip
1. Make sure the power is turned off and the heater as cooled for at least 30 minutes before replacing the new sensor.
2. Location: The stack flue sensor is located within the heater on the black manifold next to the other sensors. The two wires connecting to the sensor will be plugged in when opening.
3. Often times your probe will need to be replaced when your heater is displaying error code "E02", or displaying "HI" and your heater will not turn on.
lf the temperature on your control panel displays incorrect temperature, your thermistor may need to be replaced. Thermistor often displays a temperature that is much too high when it reaches the end of its lifespan.
Easy To Install
Hex head probe provides easy installation into the heater manifold, while plug in connector allows easy port access.
Tip
1. Make sure the power is turned off and the heater as cooled for at least 30 minutes before replacing the new sensor.
2. Location: The stack flue sensor is located within the heater on the black manifold next to the other sensors. The two wires connecting to the sensor will be plugged in when opening.
3. Often times your probe will need to be replaced when your heater is displaying error code "E02", or displaying "HI" and your heater will not turn on.
The Feature of 471566 Yellow Wire Thermistor Sensors Probe 10K Ohm Replacement for Pentair MiniMax UltraTemp ThermalFlo Pool Spa Pumps Heaters
1. Fits Pentair MiniMax NT STD, NT LN, NT TSI pool and spa heater models 200, 250,300,400,also fits UltraTemp and ThermalFlo pool and spa heat pumps.2. Hex head probe provides easy installation into the heater manifold, while plug in connector allows easy port access.
3. The replacement part is made of top quality materials and well-tested by the manufacturer to ensure the best performance.
4. Wide compatibility with OEM specifications,No harmful chemicals and safe to use.
Application:
For indoor or outdoor installations on pools and spas. Features include an LED temperature readout with dual thermostat controls, temperature safety lockout, and 6-position control panel.
