| Battery Model: | BGNP12200F | Battery Chemistry: | Sodium ion Battery / Na-ion Battery |
Operating Voltage: | 12.0 V (average) @ C/3, 23°C/73°F | Rated Capacity: | ≥ 200 Ah @ C/5, 23°C/73°F |
| Battery Size: | 420*185*282.5 ± 1 mm (metal case size) | Battery Weight: | 32 ± 0.5 kg |
| Terminals: | Red and black terminals with M8 screw hole. | Cell Type: | Grade A Electric Vehicle Level Cells |
| Max discharge short/peak: | 120A/150A (can be increased) | Max charge short/peak: | 120A/150A (can be increased) |
| Charging Voltage : | ≤ 15.8 V @ CC/CV charge, above 0°C ≤ 15.2 V @ CC/CV charge, 0°C ≥T≥ -10°C | Discharge cut off Voltage: | 8.0 V (When any cell volt reaches 2.0V may trigger this protection) |
Internal Resistance: | ≤ 4 ± 0.5 mΩ | Battery Cycle Life | ≥ 4000 times @ 80% DOD, ± C/3, 23°C |
Temperature for charging process: | -15 ~ 60 ºC | Temperature for discharging process | -40 ~ 60 ºC |
| Features: | 1: Our battery pack can be put in parallel config or series config! 2: Use High Strength Steel Case with Handles! 3: Can be charged as low as -15ºC! 4: With Bluetooth function supprt read battery information in Smartphone! 5: Support Customized based on your requirements. | ||
| Applications: | For the outdoor applications of voltage from 300V to 3V, and which products have to face the Hot temperature as high as 60°C and/or Cold temperature as low as -30°C or even -40°C. | ||
| Warranty: | 5 Years | ||
12V200Ah High Temperature performance Sodium ion battery for solar energy storage and RV 12V Na-ion Battery Pack
We use sodium ion cells that build the battery model belongs to electric vehicle level cells (VDA cells) with stable quality and good consistency, which have passed the highest level of on road test in China and have been massively produced. The inner structure of our sodium ion battery pack is pretty good, use laser welding with aluminum bus-bar among cells to allow the big current stably passing.
Better Safety Chemical Materials:
Sodium ion is less prone to thermal runaway, it does not fire or explode during overcharge, over discharge, short circuit, acupuncture and etc tests. Unlike lithium-ion cells, this model of sodium ion battery pack can be discharged to 0V but will not cause safety risk. It is a great choice for the applications that may cause over-discharge but still require high safety.
Bestgo's Sodium ion battery pack has a much wider work temperature range than lithium ion battery, which can be charged as low as -15°C and discharging as low as -40°C. Discharging and discharging support at the temperature of up to 60°C and do NOT require extra heating or cooling methods. Its excellent extreme temperature work performance very suitable for the cold and hot regions.
Good Energy Density:
The energy storage density of sodium-ion batteries is three times that of lead-acid batteries, also lead-acid need to be replaced after being used for 1 or 2 years while sodium ion battery is maintain free. In addition, sodium-ion batteries are not only smaller in size but also much lighter in weight than lead-acid batteries. Therefore sodium ion battery is a perfect alternative to lead acid battery.
Long Cycle Life:
The cycle life of sodium ion battery are comparable to lithium ion battery about 4000 cycle times, and 3 times of Lead-acid battery, no need to maintain. For Battery Cycle Life in case of over discharge condition, it support ≥ 100 cycle times, after cycles can still deliver ≥90% rated capacity. It' enough for you to face emergent situation.
Advanced Design Of Battery Pack:
Well designed with high strength painted steel case, and equipped with handles, IP66 can protect from dust and water. Built-in PCB BMS support read battery pack information at smartphone by Bluetooth. Battery pack can be figured in parallel or series config to support 12V400Ah, 24V200Ah, 36V200Ah ect systems. Support RS485 and CAN-bus communication message output.
Customized Supported:
As a professional battery pack manufacturer with 13 years of experiences we specializing in customized lithium ion and sodium ion battery depend on your application requirements, appearance and dimension can be customized, BMS can adjusted to support your usage condition. For OEM and ODM order, please contact us directly get more information.
Widely Applications:
Sodium ion Battery is a very good alternative to lead-acid battery and has great potential to replace lithium ion battery in certain application, such as: Engine starting battery(SLI batteries), electric bicycle/motorcycle/scooter, golf trolley/carts, industry batteries, RV, caravan, Home Appliances, Consumer Electronics, BOATS, Golf Carts, Solar and large-scale energy storage.
Bestgo Battery Co., Ltd. specializes in manufacturing advanced lithium-ion and sodium-ion battery packs, which featured as high continuous and high peak power output, long cycle life and reliable consistency. Compared with a battery pack manufacturer, we prefer to be called a custom solution provider. With strict quality control methods and advanced manufacturing processes, we support our customers with high quality products at competitive pricing. We mainly offer OEM and ODM service for customer's customized battery orders, with detailed description from customer about battery requirements, we response with fast and effective communication, to offer well designed battery proposal and deliver "ready to use" products.
Our company established in 2011, after years of research and developments. We have partnered with a majority of companies to provide sales, marketing and customer support in Worldwide. We developed 2 distributor in Oversea market. To be proud of, since 2020 we became the first-class supplier of a Global TOP500 enterprise, provide battery pack for three of their brand regularly. Our factory is located in Nantong City near Shanghai, factory has 4,200 square meters. Our technical team is directed by Doctor Xu, a specialist in the chemistry of lithium batteries, our team of engineers cover the chemistry, electronics, structure etc.
Our production strictly in the terms of ISO 9001 and complies the IATF 16949 quality management and control systems which is an authoritative standard widely acknowledged and adopted by the global automotive industry. Some of our battery pack are UL certificated. Our engineers got IPC-620 (a certificate well-known in electric assembly field) They are professional and innovative with 10 years experiences. For massively production, we will help you to get UN38.3, MSDS ect necessary certificate.
