The function of the car suspension ball joint is to effectively alleviate the impact of large obstacles such as speed bumps, ensure ride comfort, and provide sufficient support for the car body. The suspension ball joint is used for the steering wheel and steering wheel of the car. The connection is the most critical part in the steering system of the independent suspension chassis and is the safety component that ensures the steering and jumping of the steering wheel.
The symptom of a damaged stabilizer link is that the front wheels of the car may make a "clicking" sound when the vehicle starts or accelerates. When parking, even if you apply the brakes slightly, there will be a "clicking" sound. The vehicle will make a "gurgling" or "gurgling" sound when driving on uneven ground, but the abnormal sound will disappear when driving on a flat road. The stabilizer link is the main component connecting the stabilizer bar and the vehicle suspension. The most important function of the stabilizer linkr is to achieve a balanced vehicle operation, limit the body roll when the vehicle bends excessively, and prevent the tires from touching the ground. Under what circumstances does the stabilizer link not work? kick in? When the vehicle is traveling straight on a flat road and the left and right wheels pass through bumps or holes in the same road surface, the stabilizer link does not work. In other words, the stabilizer link does not work when the left and right suspensions move up and down synchronously, because under what circumstances the stabilizer link works, if the left and right wheels pass through different road bumps or holes respectively while the vehicle is driving, that is, the horizontal height of the left and right wheels The different stabilizer link only work when the left and right suspensions move asynchronously due to excessive steering bends.
The general inspection and damage judgment method for a stabilizer link is to stabilize the vehicle and turn the steering wheel in one direction. You can see the ball joint directly on the balance pole. You can feel if there is any gap by pulling the ball joint tie rod end on the balance pole and shaking it with your hand. If there is a gap, it means the ball joint tie rod is loose. After lifting the vehicle with a lift, first observe whether the dust cover of the stabilizer link ball joint shows signs of aging or oil leakage. Use a pry bar to pry out the stabilizer link ball joint on one side from the vehicle for a road test. Whether the abnormal noise from the chassis changes when driving on uneven ground. Generally speaking, when the ball pin of the stabilizer link is damaged, the abnormal noise may disappear or be reduced after disassembly.
ball joint for Peugeot 307
1 HDAG auto ball joint 8mm for PEUGEOT 307 Ball Joint OE 3640.53,364053
2 Item Specifications
Cone Size [mm]:15,63
Thread Size:M38x1,5
Fitting Position:Lower
OEM: 3640.53,364053
Certification:ISO9001:2015 TS16949
3 Compatibility list
CITROEN BERLINGO (B9) 1.2 PureTech 110 02/2016 - 1199
CITROEN BERLINGO (B9) 1.6 04/2008 - 1587
CITROEN BERLINGO (B9) 1.6 04/2008 - 1587
CITROEN C4 Coupe (LA_) 2.0 HDi 07/2008 - 07/2011 1997
CITROEN C4 Coupe (LA_) 2.0 VTR 10/2006 - 12/2007 1997
CITROEN C4 Grand Picasso I (UA_) 1.6 16V 07/2008 - 12/2010 1598
CITROEN C4 I (LC_) 1.6 THP 140 07/2008 - 07/2011 1598
CITROEN C4 I (LC_) 1.6 THP 150 07/2008 - 07/2011 1598
CITROEN C4 I (LC_) 1.6 VTi 120 07/2008 - 07/2011 1598
PEUGEOT 307 (3A/C) 1.6 16V 08/2000 - 11/2007 1587
PEUGEOT 307 (3A/C) 1.6 BioFlex 09/2007 - 1587
Reference packing way:
Each item with neutral plastic bag/foam bag/HDAG color bag/customized logo bag, then in outer cartons with woven bag;
Of course, we offer color box and outer pallets service if you demand;
Our ball joints tie rod workshops:including placing material, stamping, machining, riveting, assemble, adjusting, packing etc...
Our semi-finished suspension parts show:
Testing Equipment&Report
I. We only do OEM, produce high precisional suspension parts, different with other factories: attached our torque and tensile test machines
II.Quality guarantee: We promise to all of our old and new customers: ONE year guarantee or 50,000kms since B/L date, If we ship u wrong products or any quality problem, we will full compensation with free.
Attached our tie rod ball joints material report:
Customer visits and our service team:
Attend exhibitions
+86-ONE FIVE NINE FIVE EIGHT SIX ZERO SIX ONE TWO FIVE
Our certificates:
Our brand HDAG, POWERTRAC registration, license and export registration, our tie rod ball joint stabilizer link patents registration:
Contact usWe are an auto parts manufacturer and with strong warehouse, We can supply good quality goods with best prices to you!
