CYX23
Piezoresistive Pressure Sensor
SemiConductor Type
Diffused Silicon Pressure Transmitter
Analog Type
Integration
Stainless Steel
M
Four-Wire
Liquid
CE
Customized
-100kpa~10kpa~10MPa
Oil Filled Isolated Diaphragm Piezoresistive Press
≤1ms
Silicon Oil / Fluorine Oil
40~+125ºC
1.5(Max Input Voltage Is 10VDC) Ma
Huatian
Standard Package
Tianshui, Gansu, China
Product Description
CYX23 series oil filled pressure sensor is a joint type flat film sensitive device. It is produced by selecting international advanced highly stable and high precision silicon pressure chip, adopting stress-optimized design of sintering base, through SMD, gold wire bonding, diaphragm welding, high vacuum oil injection, pressure cycle stress relief, high temperature aging, temperature compensation and other processes. More than 30 years of development, production experience and process innovation have given the product excellent stability and excellent performance, which has been widely recognized by users.
1.1 CYX23 series pressure sensor: Recommended thread
The recommended standard thread connection is M20 × 1.5 and G1/2. The product is used for pressure detection of media compatible with stainless steel 316L, NBR or fluororubber.
1.2 Gauge type CYX23 series pressure sensor model + Y for negative pressure measurement
The negative pressure type is produced by negative pressure special process, which can reliably detect the pressure lower than atmospheric pressure. The range is between - 100kPa and 3MPa.
- the measuring range is 0kPa ~ 10KPa···10MPa
- it has the form of gauge pressure G, absolute pressure A and sealing gauge pressure S
- constant current / constant voltage power supply
- isolated structure, suitable for a variety of fluid media
- M20 × 1.5, G1/2 thread optional
- all 316L stainless steel
- industrial process control
- liquid level measurement
- gas and liquid pressure measurement
- pressure switch and hydraulic system
- medical and food equipment
4.1 Electrical performance- power supply: ≤ 3.0mA; DC ≤ 10V DC
- electrical connection: 0.2mm2, 4-color ,100 mm silicone rubber flexible conductor
- common mode voltage output: 50% of current mode input (typical), 40% of voltage type input (typical)
- input impedance: 2.7k Ω ~ 5k Ω
- output impedance: 3.0k Ω ~ 6k Ω
- response time (10% ~ 90%): < 1ms
- insulation resistance: 500M Ω / 100V DC
- allowable overvoltage: 1.5 times full scale
- 4.2 Structure performance
- diaphragm material: stainless steel 316L
- housing material: stainless steel 316L
- pressure pipe material: stainless steel 316L
- pin lead: Gold Plated Kovar
- sealing ring: NBR, fluororubber (optional)
- net weight: About 50g (CYX23), 70g (CYX25)
- vibration: no change at 10gRMS, (20-2000) Hz
- constant acceleration: 100g, 11ms
- media compatibility: liquid or gas of 316L and NBR (optional fluororubber)
- 4.4 Base conditions
- medium temperature: (25 ± 3) ºC
- environmental pressure: (86 ~ 106) kPa
- power supply: (1.5 ± 0.0015) mA DC
- 4.5 Standard range, sensitivity output and optional pressure form
Range Full scale
Output (mV)Typical value Pressure
formRange Full scale
Output (mV)Typical value Pressure
form0~10kPa 35~60 45 G 0~600kPa 90~120 100 G/A 0~20kPa 70~110 90 G 0~1.0MPa 80~120 100 G/A 0~35kPa 55~80 70 G/A 0~1.6MPa 125~185 150 G/A 0~70kPa 55~80 60 G/A 0~2.0MPa 50~70 60 G/A 0~100kPa 60~85 75 G/A 0~3.5MPa 100~120 110 G/S/A 0~200kPa 65~85 75 G/A 0~7.0MPa 120~150 135 S/A 0~400kPa 60~80 70 G/A 0~10MPa 180~230 200 S/A
4.6 Basic parametersParameters Typical value Maximum Company Zero output + 1 + 2 MV Nonlinearity 0.2 0.5 %FS Hysteresis 0.05 0.08 %FS Repeatability 0.05 0.08 %FS Input / output impedance 2.6 5.0 K Ω Zero temperature drift note 1 ±0.4 ±1.0 %FS, @25ºC Sensitivity temperature drift note 2 ±0.4 ±1.0 %FS, @25ºC Long term stability 0.2 0.3 %FS / year Exciting current 1.5(the maximum input voltage can be 10V) mA Insulation resistance 500 (100VDC) M Ω Compensation temperature note 3 0~50; -10ºC~70ºC ºC Working temperature -40~+125 ºC Storage temperature -40~+125 ºC Response time ≤1 ms Housing and diaphragm material 316L stainless steel Ed seal ring 18.5× 23.9 × 1.5mm
Fluororubber note 4, nitrile rubberMeasuring medium Fluids compatible with 316L, nitrile rubber or fluoroelastomer Life (25 ºC) > 1 × 108 pressure cycle (80% FS) times Filling medium silicone oil Note 1 & note 2: The typical value of zero temperature drift and sensitivity temperature drift of 0-10kPa is 0.5%FS@25ºC, maximum 1.2%FS@25ºC.
Note 3: 200kPa and below range, compensation temperature 0 to 50°C; above 200kPa, compensation temperature -10°C to 70°C.
Note 4: The temperature resistance range of fluororubber seal ring is - 20 ºC ~ 200 ºC, and its low temperature performance is poor. When the temperature range is lower than -20 ºC, please verify the use.
5 Selection structure
5.1 Model selection and outline drawing
Series Range Model Outline drawing CYX23/P -100kPa~10MPa CYX23 
CYX23P 
6 Schematic diagram and wiring mode
7 Application TipsIN+ (red wire) - positive supply IN- (black wire) - negative supply S+ (yellow wire) - positive output S- (blue wire) - negative output - The sealing method of the pressure sensor is recommended for the hexagonal ED seal structure. Avoid excessive torque affecting the stability of the pressure sensor during thread installation. The recommended torque is not greater than the following values according to the pressure range: 0~500kPa, 0.9Nm; 500kPa~2MPa, 1.1Nm; 2MPa~10MPa, 1.6Nm.
- Pay attention to protect the front diaphragm and the compensation circuit board at the back end of the pressure sensor, so as not to damage the performance or cause damage to the sensor.
- Do not press the metal diaphragm with hands or hard objects to avoid damage to the sensor due to chip deformation or perforation
- The ventilation pipe at the rear of the G-type sensor should relate to the atmosphere; water, water vapor or corrosive media are not allowed to enter the reference chamber at the rear of the sensor.
- Avoid falling, hitting, etc., which will affect the stability of the sensor
- In case of change in the pin lead, the label carried by the sensor shall prevail.
Company Information
Tianshui Huatian Sensor Co., Ltd. is a new high-tech enterprise which combined R&D, production, sales with engineering service. It is one of the enterprises which engaged in the integrated pressure sensors and transducers in China. We have passed GB/T 19001-2008 quality management system certification in November 2009.
The Main Products:
CYX series pressure sensors, CYB series pressure transmitter, CYBD series intelligent measurement instrument, CYBK series electronic pressure switches and CW series temperature transmitters.
At present, the company has a number of patents with independent intellectual property rights for the integrated pressure sensors and transducers, which are widely used in industrial automation fields such as coal, oil, electric power, metallurgy, light industries and etc.
The First-Class Equipment:
Laser Trimming Machine; Gold Wire Ball Welding Machine; Shaped Cap Sealing Machine; Laser Welding Machine; High Vacuum Oiling Machine; Precision High Low Temperature Test Box; High Precision Automatic Temperature Compensation System and Automatic Test System and Other Hardware Facilities.
Business Advantages:
One hundred thousand purification plant (3000m2); Pressure sensors, transducers and intelligent digital instrument production line (200000 pieces annual output); A leading domestic OEM oil pressure sensor core body production line (1000000 pieces annual output); High-quality R & D team; Advanced process technology.
We are willing to create a splendid future with customers and partners hand in hand.
Factory Production Equipment
