HP10M
Piezoresistive Pressure Sensor
SemiConductor Type
Diffused Silicon Pressure Transmitter
Analog Type
Integration
Stainless Steel
G
Three-Wire
Liquid Gas Steam
IP65
ISO9001
Customized
Pressure Sensor
-100kpa...0~0.01...100MPa
Gauge, Absolute, Sealed Gauge
0.5%F.S.(typical);
1.5 times the full scale
5VDC 24VDC
4~20mADC 1~5VDC
-30~85ºC
-40~120ºC
304, 316L
HIGHJOIN
Carton
China
90262010
Product Description
- Typical 4~20mA or 1~5VDC output, 24VDC power supply
- Φ19mm standard pressure sensor with signal conditioning circuit
- Wide temperature compensation
- All 316L material
- High performance
HP10M piezoresistive silicon pressure module is the core component for the manufacture of pressure sensors and pressure transmitters. As high-performance pressure sensitive component, it can be easily amplified and assembled into the pressure transmitters with standard signal output.
| Pressure range | -100kPa~0~10kPa…100MPa |
| Pressure reference | Gauge pressure | Absolute pressure | Sealed gauge pressure |
| Power supply | 24V(10~36V) for 4-20mA output 24V(12~26V) for 0-5VDC output |
| Electrical connection | Soft wire |
| Compensation temp. | Constant current: ≤70kPa 0ºC~60ºC; other ranges -10ºC~70ºC Constant voltage: -20ºC~85ºC |
| Operating temp. | -40ºC~125ºC |
| Storage temp. | -40ºC~125ºC |
| Insulation resistance | ≥200MΩ/250VDC |
| Response time | ≤1ms (up to 90%FS) |
| Measured medium | All the liquids and gases compatible with 316L. |
| Mechanical vibration | 20g (20~5000HZ) |
| Shock | 100g (10ms) |
| Service life | 10×106 (cycles) |
| Structural performance parameters | |
| Diaphragm material | 316L |
| Housing material | 316L |
| Oil filling | Silicon oil |
| Sealing ring | NBR or fluorine rubber |
0~5V output 4~20mA output
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.5. Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.6. Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.7. Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU.
A: We could accept T/T, Paypal, WU.
