O3 SO2
10-30VDC
RS485 Output (Standard Modbus RTU Protocol)
0~10ppm
±6%Fs
0~20ppm
±3%Fs
O3 and So2
- 10 ºC - 55 ºC
0 ~ 95% Rh
Veinasa
Covered with Carton Packing.
O3 resolution: 0.01ppm SO2 resolution: 0.1ppm
Sichuan, China
Product Description
Sulfur Ozone Dioxide O3 SO2 Sensors Monitor Analyzer RS485 Gas Leak Detector with Solar Radiation Shield
Sulfur Ozone Dioxide O3 SO2 Sensors Monitor Analyzer RS485 Gas Leak Detector with Solar Radiation Shield is a 2 in 1 gas sensor which can be used to measure O3 and SO2.
The integrated louver can be widely used in environmental detection. It is installed in the louver, and the equipment adopts standard MODBUS-RTU Communication protocol, RS485 signal output, communication distance up to 2000 meters (measured). The transmitter is widely used to measure the ambient air quality and other occasions, safe and reliable, beautiful appearance, easy to install, durable.
DC power supply | (default) DC 10-30V | |||
The maximum power consumption | Less than 0.8W | |||
The detection parameters | O3, SO2 | |||
Working environment: | Temperature - 10 ºC - 55 ºC; humidity 0 ~ 95% RH, non condensing | |||
Signal output | RS485 output (standard Modbus RTU protocol) | |||
Material | ABS | |||
Installation method | Bracket installation | |||
Signal output | RS485 output (standard Modbus RTU protocol) | |||
Material | ABS | |||
Installation method | Bracket installation | |||
Detection parameters | Measurement range | Resolution | Accuracy | Preheating time |
O3 | 0~10ppm | 0.01ppm | ±6%FS | ≥5 min |
CO | 0~1000ppm | 1ppm | ±3%FS | ≥5 min |
Wide - voltage power supply input 10-30V. 485 when wiring the signal line, notice that the two lines of A\B cannot be connected in reverse, and the addresses of multiple devices on the bus cannot conflict.
The line color | Instructions | |
Electricity the source | Brown | Power positive (10~30V DC) |
Black | The power negative | |
Tong the letter | Yellow | 485 - A |
Blue | 485 - B |
Applicartions:
This transmitter is widely used for measuring air quality in chemical companies, meterology, scientific research, pharmaceutical Industry and so on.
Q: Are you a factory/manufacturer?
A: Yes, we are a professional factory/manufacturer of water quality sensors. We also have hot sale and widely used weather sensors XS-PM01 which can be used to measure PM2.5 and PM10.
Q: What are the power supply output and common signal output?
A: The common power supply output and signal output are DC10-30V and RS485 respectively. But we can customize for you as demands.
Q:Can other parameters be added?
A:Of course, you can add formaldehyde (CH2O), ozone (O3), oxygen (O2), hydrogen sulfide (H2S), methane (CH4), sulfur dioxide (SO2), hydrogen (H2), ammonia (NH3), carbon monoxide (CO), nitrogen dioxide (NO2) and other parameters in the environment. We accept customized service.
Q: How can I collect data?
A: If you have your own data logger, you only need to buy our sensor and meanwhile we send you communication protocol.
If you do not have, we can add our data logger for you, also provided with English software, which can help you read, inquire and download data.
Q: What's the lifetime of this sensor?
A: At least 5 years long. Every sensor has its own calibration certificate or testing report.
Q:What's the delivery time?
A: Usually, we dispatch goods in 3-5 working days after receiving your payment. But it depends on your quantity.
Q: May I know your warranty?
A: Yes, usually it's 1 year. We can send you detailed warranty document if needed.
NO2 Tester Nitrogen Dioxide Meter Portable CO Gas Monitor Carbon Monoxide Detector Sensor Solar Radiation Shield
With rich experiences in tackling problems, Veinasa aims to provide a package of meteorological solutions to your needs, whatever problems you encounters, Veinasa team always stand by your side.
Sulfur Ozone Dioxide O3 SO2 Sensors Monitor Analyzer RS485 Gas Leak Detector with Solar Radiation Shield
Just click the below picture to send us inquiry, to know more, or get the latest catalogue and competitive quotation. Do not hesitate!
