CXPTB-102-N-4-A-M
Piezoresistive Pressure Sensor
SemiConductor Type
Diffused Silicon Pressure Transmitter
Digital Type
Integration
Stainless Steel
NPT
Four-Wire
Liquid
IP65
CE
Customized
Pressure Sensor
0~2.5MPa
0.25%Fs
18-36VDC
4-20mA
IP65
GN
Plywood/Carton
CE, ISO, SGS
Shanghai
9026201090
Product Description
A pressure sensor is a device or device that can sense pressure signals and convert them into usable output electrical signals according to a certain pattern.
Pressure sensors are usually composed of pressure sensitive components and signal processing units. According to different types of test pressure, pressure sensors can be divided into gauge pressure sensors, differential pressure sensors, and absolute pressure sensors.Pressure sensors are the most commonly used type of sensor in industrial practice, widely used in various industrial automation environments, including water conservancy and hydropower, railway transportation, intelligent buildings, production automation, aerospace, petrochemical, oil wells, power, ships, machine tools, pipelines, and many other industries.
Product Name | GN 4-20mA Explosion-proof Pressure Transmitter Transducer Controller IP65 Pressure Sensors |
Medium | liquid, gas and steam |
Measuring Range | 0~0.1kPa to 0~40MPa |
Output | 4~20mA DC+HART protocol |
Accuracy | ±0.1%FS |
Range and null point | Adjustable |
Power Supply | 12~45V DC, generally 24V DC |
Storage Temperature | -40~+125°C |
Overload Limit | 150%-200% of rated range |
Load Resistance | 750Ω(See below diagram 1 for load characteristic ) |
Relative Humidity | 5~95% |
Converter housing | Low copper cast aluminum alloy with Polyurethane paint |
Fill Fluid | Silicon / Fluorine Oil |
Process Connections | 1/2NPT, 1/4NPT |
Static pressure | 4, 10, 25, 32Mpa |
Mounting | Directly supported by piping or optionally with mounting bracket for 2" pipes or with direct or remote seals. 3-way valve |
Material | Flange/Adaptor:Monel/ Haste alloy/Carton Steel Drains/Vents:Stainless Steel 316/Monel / Haste alloy Diagrams:Stainless Steel 316/Monel /Haste alloy C/ Tantalum |
Wiring Diagrams
Connect the bench equipment as shown in Figure, and turn on the HART-based communicator by pressing the ON/OFF key. The communicator will search for a HART-compatible device and will indicate when the connection is made. If the communicator fails to connect, it will indicate that no device was found.
