Fluid Level Indicator
--------As gold supplier in 9 consecutive years
Water tank radar level sensor antenna microwave pulse is narrow, the downward transmission antenna. Microwave exposure to the medium surface is reflected back again by the antenna system receives, sends the signal to the electronic circuit automatically converted into level signals (because the microwave propagation speed, electromagnetic wave to reach the target and the reflected back to the receiver this time is almost instantaneous).
This series of radar level sensor adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 70 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.
The CX-RLM-806 water tank radar level sensor,the medium is liquid ,could measure the Corrosive liquids.The frequency is 26G,so with higher accuracy.
The CX-RLM-808 water tank radar level sensor ,the medium is liquid(measure range :70m) andsolid .But measure range is less than 55m.The 808 Model with Multidirectional flange.
[Parameters]
| Radar Lever Meter---Basic Production Information | ||
| Frequency | 6.8GHz ; 26GHz | |
| Beam Angle | ||
| Model | Beam Angle | |
| 081 ; 082 | 24° | |
| 083 | 14°;16°;20°(according to the size of connection) | |
| 805 | 22° | |
| 806 ;807 | 8°;12°;18° | |
| 808;809 | 6°;8°;12° | |
| Measuring range | 0~35m or 0~70m | |
| Repeatability | +/-2mm | |
| Resolution | 1mm | |
| Sampling | Echo Sampling 55times/S | |
| Responding speed | >0.2S | |
| Output | 4~20mA | |
| Accuracy | 0.1% accuracy | |
| Antenna material | Model | Material |
| 081 | PP or PTFE | |
| 082;805 | PTFE | |
| 083;806 | SS316L | |
| 807;808;809 | SS316L | |
| Communication | HART/RS485/MODBUS | |
| Connection | ||
| Model | Size of Connection | |
| 081 | ||
| 082;083 | ||
| 805;806 | ||
| 807;808;809 | ||
| Power Supply | 24V DC(+/-10%) Ripple voltage:1Vpp | |
| Enviroment | Temperature:-40~70ºC;Pressure:-1...40Bar | |
| Exploson | Exia 2 CT6 | |
| Protection | IP67 | |
| Electrical Interface | Double M20*1.5 or Double 1/2NPT | |
C.[Installation]
1. Installation Location
- The distance from tank to level meter must more than 1/6 diameter of tank;
- The min distance from the tank wall is 300mm;
- Can not installa the level meter on the top of feed inlet;
- Can not installa the radar level meter at central location;
- Within the signal beam,there should be no installation.
2.Guide wave installation
- Do not tilt the antenna to the pipe wall;
- To min temperature effects,pls installa the washer at the flange connection;
- The rod antenna must have a short pole at the launch of the radar;
- Vertical antenna rod, do not let the radar wave pointing to the tank wall.
3.Intelligent radar level meter installation
- Should installa the level meter at 1/4 or 1/6 diameter;
- Bell mouth alignment level surface is sloped pls adjust the angle of flange.
Q1.Are you a factory?
A1:We are based in Shanghai, China, start from 2011.Main production and sales of various industrial flow meters and other products.Welcome to visit!
Q2.what can you buy from us?
A2:We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.
Q3. What is your terms of packing?
A3: Generally, JSN brand colorful cardboard boxes packing.OEM brandbrown cardboard boxes packing.
Q4. How about your delivery time?
A4: Generally, standard type : 6-7 working days after confirm the order.non-standard type: 8-10 working days after confirm the order.
Q5. What's your MOQ?
A5: We have no MOQ demand, 1 piece for test purpose at first is acceptable.
Q6. How do you ensure good product quality?
A6: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.
Q7. How long your quotation valid?
A7: Our quotation valid for 1 months.
Q8. Can you accept OEM brand?
A8: Yes, we can accept the OEM brand without extra charge.
Q9. How long is your product warranty?
A9: 7 days replacement and 12 months repair free of charge for quality problem.
Q10. Can you produce according to the samples?
A10: Yes, we can produce by your samples or technical drawings
