HW-1008
Wall-Mounted Type
Human Movements
Contactless
Analog Type
Integration
ABS
Temperature
IP44
RoHS
Customized
NA
by Air
86*86mm
China
Product Description
86 type embedded human body sensing foot light, staircase step sensing light, corridor, corridor LED foot light
Product Name: LED Human Body Sensing Foot Light
Product color: Modern Grey/Champagne Gold Elegant White
Working voltage: AC85-250V 50/60HZ
Color temperature: 6000K for white light/3000K for warm light
Sensing distance: 3-5 meters
Delay time: 35 ± 10 seconds
Rated power: 3w
Control angle: 90-120 °
Starting care: 5Lux (natural light)
Color temperature: 4000K
Daytime - not bright.
The lighting around the lamp is bright or illuminated by light sources.
When the light sensor is on, it will not light up when people come.
Darkness - When people come, they light up.
The lighting around the lamp is dim or there is no light source shining on it.
When the light sensor is on, it will light up when people come.
Installation precautions:
The installation height of the switch should be 1.4m from the ground and 0.2m from the door.
The installation height of the socket depends on the different usage environment.
Living room: 30cm above the ground.
Kitchen/bathroom: 1.4M above ground level.
The air conditioning socket is 1.8m above the ground.
The distance between power lines and sockets should not be less than 50CM.
When installing a power socket, connect the neutral wire (N) to the left side of the socket, the live wire (L) to the right side, and the protective ground wire (PE) to the middle and upper parts. For household power sockets, it is recommended to use products with protective doors to protect the lives of family members, especially children.
The switches or sockets installed in the bathroom and open balcony should be equipped with corresponding waterproof boxes.
The switch for controlling the lighting fixtures in the bathroom should be installed outside the bathroom door to prevent water vapor from entering the switch, affecting its lifespan or causing accidents. The socket installed next to the bedroom bed should avoid being obstructed by the bedside table or bed board.
Product Name: LED Human Body Sensing Foot Light
Product color: Modern Grey/Champagne Gold Elegant White
Working voltage: AC85-250V 50/60HZ
Color temperature: 6000K for white light/3000K for warm light
Sensing distance: 3-5 meters
Delay time: 35 ± 10 seconds
Rated power: 3w
Control angle: 90-120 °
Starting care: 5Lux (natural light)
Color temperature: 4000K
Daytime - not bright.
The lighting around the lamp is bright or illuminated by light sources.
When the light sensor is on, it will not light up when people come.
Darkness - When people come, they light up.
The lighting around the lamp is dim or there is no light source shining on it.
When the light sensor is on, it will light up when people come.
Installation precautions:
The installation height of the switch should be 1.4m from the ground and 0.2m from the door.
The installation height of the socket depends on the different usage environment.
Living room: 30cm above the ground.
Kitchen/bathroom: 1.4M above ground level.
The air conditioning socket is 1.8m above the ground.
The distance between power lines and sockets should not be less than 50CM.
When installing a power socket, connect the neutral wire (N) to the left side of the socket, the live wire (L) to the right side, and the protective ground wire (PE) to the middle and upper parts. For household power sockets, it is recommended to use products with protective doors to protect the lives of family members, especially children.
The switches or sockets installed in the bathroom and open balcony should be equipped with corresponding waterproof boxes.
The switch for controlling the lighting fixtures in the bathroom should be installed outside the bathroom door to prevent water vapor from entering the switch, affecting its lifespan or causing accidents. The socket installed next to the bedroom bed should avoid being obstructed by the bedside table or bed board.
