DSE9470 MKII
24 Volt 10 Amp Intelligent Battery Charger
U L RECOGNISED (USA & Canada) - NFPA 20 (QWIR2) COMPLIANT
The DSE9470 MKII is a U L recognised intelligent switch-mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections.
| OVERALL SIZE |
| 70 mm x 200 mm x 130 mm (2.7" x 7.9" x 5.1") |
| WEIGHT |
| 0.75kg |
| PRODUCT VARIANTS |
| 9470-01 - 24 V 10 A Intelligent Battery Charger (USA - U L - 110 V - 250 V) |
| 9470-A4 - 24 V 10 A Intelligent Battery Charger (USA & Canada - U L - 110 V - 150 V) |
SPECIFICATION
SPECIFICATION
AC SUPPLY
VOLTAGE RANGE
90 V to 305 V (L-N)
FREQUENCY RANGE
48 Hz to 64 Hz (L-N)
DC OUTPUT
DSE9470 OUTPUT
10 A DC at 24 V DC
RIPPLE AND NOISE
<1%
EFFICIENCY
>86%
REGULATION
LINE
<0.5%
LOAD
2%
TEMPERATURE SENSOR INPUT
PT1000
PROTECTIONS
Short Circuit
DC Over Voltage
DC Over Current
Reverse Polarity
Over Temperature
AC Under & Over Voltage
CHARGE FAILURE RELAY
3 A at 30 V DC volt free relay
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for the Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for the Industrial Environment.
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30°C.
BS EN 60068-2-2
Bb/Be Dry Heat +70°C.
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes.
5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn.
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55° C @ 95% RH 48 Hours.
BS EN 60068-2-78
Cab Damp Heat Static 40° C @ 93% RH 48 Hours.
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15 gn in 11 ms.
