Electric forklift
1. The operation and control of electric forklifts are simple and flexible, and the operating intensity of their operators is much lighter than that of internal combustion forklifts. The electric steering system, acceleration control system, hydraulic control system, and braking system are all controlled by electrical signals, greatly reducing the labor intensity of the operators. This is very helpful for improving their work efficiency and accuracy.
2. Electric forklifts are low-carbon and environmentally friendly. Generally, electric forklifts use batteries for operation, which will not have a negative impact on the environment. At the same time, the noise emitted by the engine of electric forklifts is very small, and the noise of new cars can be basically ignored.
3. From the perspective of enterprise costs, using electric forklifts to operate raw materials can significantly reduce the cost, which is also one of the important factors for many enterprises to choose electric forklifts. Enterprise cost control is an important component of enterprise development
| General | Manufacturer | GP | |||||||
| 1 | Model | CPD20 | CPD25 | CPD30 | CPD35 | ||||
| 2 | Rated capacity | kg | 2000 | 2500 | 3000 | 3500 | |||
| 3 | Load center | mm | 500 | ||||||
| 4 | Power type | Battery | |||||||
| 5 | Tire type | Front/Rear | Pneumatic | ||||||
| 6 | Wheels | Front/Rear | 2*2 | ||||||
| Dimensions | 7 | Lift height | mm | 3000 | |||||
| 8 | Free lift height | mm | 140 | 145 | |||||
| 9 | Fork size | L*W*T | mm | 1070*120*40 | 1070*120*42 | 1070*120*45 | |||
| 10 | Mast tilt angle | Fwd/Bwd | deg | 6/12 | |||||
| 11 | Overall length (without fork) | mm | 2325 | 2481 | |||||
| 12 | Overall width | mm | 1170 | 1265 | |||||
| 13 | Mast height fork lowered | mm | 2070 | 2040 | |||||
| 14 | Overall height fork raised | mm | 4030 | 4270 | |||||
| 15 | Overall height (overhead guard) | mm | 2170 | 2125 | |||||
| 16 | Turning radius (outside) | mm | 2320 | 2230 | |||||
| 17 | Load distance (centerline of front axle to front face of forks) | mm | 479 | 484 | 454 | 450 | |||
| 18 | Minimum Aisle -90 stack(Add load length and clearance) | mm | 4160 | 4360 | 4850 | 4950 | |||
| 19 | Wheel base | mm | 1500 | 1630 | 1720 | ||||
| 20 | Tread | Front | mm | 960 | 980 | ||||
| 21 | Rear | mm | 950 | 954 | |||||
| 22 | Min. Under-clearance | Bottom of mast | mm | 100/120 | 85/105 | ||||
| 23 | Bottom of frame | mm | 100/120 | 120/140 | |||||
| Performance | 24 | Speed | Travel Max. | With load | km/h | 11 | 10.5 | 12 | 13.5 |
| 25 | Without load | km/h | 12.5 | 12.5 | 13 | 13.5 | |||
| 26 | Lifting | With load | km/h | 260 | 250 | 250 | 280 | ||
| 27 | Without load | km/h | 400 | 390 | 380 | 380 | |||
| 28 | Max. Drawbar pull | With/without load | Kn | 8 | 8 | 10 | |||
| 29 | Max. Gradeability | With/without load | % (fan) | 10 | |||||
| Weight | 30 | Service weight | kg | 3980 | 4120 | 4850 | 5150 | ||
| Tyre | 31 | Tyre | Size | Front | 7.00-12-12PR | 23*9-10 | 28*9-15 | ||
| 32 | Rear | 18*7-8-14PR | 18*7-8 | 18*7-8-14PR | |||||
| power control | 33 | Battery | Voltage | V | 48 | 80 | |||
| 34 | Capacity | AH | 620 | 700 | 500 | 500 | |||
| 35 | Travel motor power | kw | 8 | 10 | |||||
| 36 | Subsidiary motor power | kw | 8.6 | 10 | 12 | 13.5 | |||
| 37 | controller | GE separate excitation controller | |||||||
