Four Wheel Electric Forklifts 1.5ton-1.8ton Low Noise High Efficiency

General		Manufacturer							GP
	1	Model							CPD10		CPD15	CPD18
	2	Rated capacity						kg	1000		1500	1800
	3	Load center						mm	500
	4	Power type							Battery
	5	Tire type				Front/Rear			Pneumatic
	6	Wheels				Front/Rear			2*2
Dimensions	7	Lift height						mm	3000
	8	Free lift height						mm	140			145
	9	Fork size				L*W*T		mm	920*100*35		920*100*35
	10	Mast tilt angle				Fwd/Bwd		deg	6/12			6/12
	11	Overall length (without fork)						mm	1056		1056	24056
	12	Overall width						mm	1090			1090
	13	Mast height fork lowered						mm	2015			2015
	14	Overall height fork raised						mm	4040			4273
	15	Overall height (overhead guard)						mm	2159			2125
	16	Turning radius (outside)						mm	2050		2100	2230
	17	Load distance (centerline of front axle to front face of forks)						mm	479		484	454
	18	Minimum Aisle -90 degree stack(Add load length and clearance)						mm	4160		4360	4850
	19	Wheel base						mm	1380			1380
	20	Tread				Front	mm			960		1040
	21					Rear	mm			950		980
	22	Min. Under-clearance				Bottom of mast	mm			100/120		85/105
	23					Bottom of frame	mm			100/120		120/140
Performance	24	Speed		Travel Max.		With load	km/h			11	10.5	12
	25					Without load	km/h			12.5	12.5	13
	26			Lifting		With load	km/h			260	250	250
	27					Without load	km/h			400	390	380
	28	Max. Drawbar pull				With/without load	Kn			8	8	10
	29	Max.Gradeability				With/without load	% (fan)			10		10
Weight	30	Service weight	kg							4160	4360	4850
Tyre	31	Tyre		Size		Front				7.00-12-12PR		23*9-10
	32					Rear				18*7-8-14PR		18*7-8
power control	33	Battery		Voltage	V					48		80
	34			Capacity	AH					*630/700		*500/600
	35	Hyfraulic motor		drive motor	kw/rpm					7.0/1400		10.2/1500
	36			lift motor	kw					8.6/1600		10/2000
	37	controller								CURTIS controller

1. The operation and control of electric forklifts are simple and flexible, and the operating intensity of their operators is much lighter than that of internal combustion forklifts. The electric steering system, acceleration control system, hydraulic control system, and braking system are all controlled by electrical signals, greatly reducing the labor intensity of the operators. This is very helpful for improving their work efficiency and accuracy.
2. Electric forklifts are low-carbon and environmentally friendly. Generally, electric forklifts use batteries for operation, which will not have a negative impact on the environment. At the same time, the noise emitted by the engine of electric forklifts is very small, and the noise of new cars can be basically ignored.
3. From the perspective of enterprise costs, using electric forklifts to operate raw materials can significantly reduce the cost, which is also one of the important factors for many enterprises to choose electric forklifts. Enterprise cost control is an important component of enterprise development