HOPSON bias repair patches can be used on tubeless or tube-type tyres. They offer excellent flexibility, greater strength and construction and have been proven safe and dependable by millions of on-the-road miles. Manufactured with a ply of rubber between the fabric and cushion gum which acts as a float or shock absorbing ply. Repair unit construction allows for easy application and enables repairs to be made closer to the tyre bead, eliminating the need for a separate sidewall repair unit.
HOPSON offers a wide selection of bias-ply (cross ply) repair units for applications on passenger, truck, OTR, agricultural and industrial bias-ply tires.
HOPSON TYRE REPAIR will always surprise you!
1. Be used for repairing bias tires of cars and trucks.
2. Can be used on tubeless or tube-type tires.
Feature
| 1. Each reinforcing ply is protected and encased in a molded ply package making each unit strong while remaining flexible. |
| 2. Designed to vulcanize chemically or in low-temperature systems. |
| 3. Gray vulcanizing gum, blue poly backing. |
4. Excellent flexibility, greater strength, and superior construction. |
Quality Guaranteed
Excellent quality, similar to Rema Tip Top and Tech; Samples can be sent for customer's testing and evaluation
Parameters
| Part No. | Size(mm) | Description | Box Qty | Case Qty |
| BP-R601 | 60 | 1Ply | 25 | 24 |
| BP-R751 | 75 | 1 Ply | 20 | 24 |
| BP-R902 | 90 | 2 Ply | 10 | 24 |
| BP-C1002 | 100×100 | 2 Ply | 10 | 24 |
| BP-C1304 | 130×130 | 4 Ply | 10 | 12 |
| BP-C1655 | 165×165 | 5 Ply | 10 | 12 |
| BP-C2407 | 240×240 | 7 Ply | 5 | 12 |
| BP-C2957 | 295×295 | 7 Ply | 5 | 12 |
| BP-C3457 | 345×345 | 7 Ply | 5 | 12 |
| BP-C3909 | 390×390 | 9 Ply | 5 | 12 |
| BP-C4509 | 450×450 | 9 Ply | 5 | 12 |
Using Methods
| Inspect the tire for repairability using the tire manufacturer or HOPSON LAB guidelines. If repairable, mark the injury with a crayon and carefully remove injuring object. |
| Probe injury to determine exact size and direction, removing all debris. |
| Select the appropriate repair patch for injury and the type of tire. Apply pre-buff cleaner to repair the area and use a rubber scraper to remove dirt and mold lubricants. Using Carbide Cutter, drill the injury channel 3 times from inside then 3 times from outside, making sure all damaged and rusted cables have been removed and only good rubber remains. |
| Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire inner liner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to the buffed area, working into rubber, and ALLOW TO DRY THOROUGHLY. |
| Remove the backing and center repair patch over the injury and thoroughly stitch down from the center out to remove trapped air. |
| Finish repair by applying Inner Liner Sealer around the edge of the repair patch the to overbuff area. |
Don't miss the opportunity to check out our full range of tire repair products.
HOPSON TYRE REPAIR will always surprise you!
Ningbo Hopson Chemical Industry Limited is a specialized glue adhesives manufactory.
We have passed American ASTM Standard, European EN71 Standard, SGS Certificate, and Quality Management System ISO9001:2000.
We are mainly producing cyanoacrylate adhesives, nail glues, eyelash glues, epoxy resin glues, tire repair cements, and other adhesives. We have more than ten years of experience in the research and development of high-property adhesives.
Our products are focused on environmental protection and high quality. We are able to provide products that meet your strict requirements.
Exhibition
NINGBO HOPSON CHEMICAL INDUSTRY CO., LTD. attends exhibitions each year in the US, Germany, Dubai, Arab, India, Shanghai, etc.
Many regular and new customers visited us, and take interested in our products. You can always find something new and different at
our booth.
Our professional sales and technical team will be there offering our best service for you.
FAQ
Q: Are you a trading company or manufacturer?
A: We are a manufacturer and also a trading company, so we can provide both good prices and excellent service.
Q: Can I use our own LOGO?
A: Yes, if the customer wants a large quantity, we can use the customer's design.
Q: Do you provide samples? Is it free or extra?
A: Yes, the sample is free if it is in stock, but the customer will pay for the freight.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock, or the delivery time is 20-30 days.
Q: MOQ?
A: Different products are different, we welcome the negotiation.
Q: What about your customer service after sales?
A: Generally, we have 2 years quality guarantee, except for some special products.
