Problem
Non-Light control area crosswalk lacks of singal to manage traffic order, and people, traffic flow is large, the traditional traffic equipment has very limited warning capabilities can't satisfy the safety need.
Drivers can not prejudge there will be pedestrians crossing the crosswalk ahead, and pedestrians lack of traffic safety awarness, which easily cause crosswalk accidents.
Solution
RRFB Intelligent Pedestrian System is an innovative system that complies with the MUTCD standard and enhances the safety of zebra crossings.
The system can be activated actively by push button or passively by the other activation equipment (e.g., Intelligent Pedestrian System Camera or Intelligent Infrared Bollards). Once the system starts, the warning equipment towards to drivers works timely(RRFB flashes) for warning them there ahead pedestrians will cross the crosswalk, please slow down and give way.
The official data showed higher motorist yielding rates at crosswalks where a similar system had been installed in comparison to lower rates for standard warning beacons. The higher-yielding rates were sustained even after two years of operation, and no identifiable negative effects were found.
Features
- FHWA MUTCD compliant
- Daytime visible light design performs greatly at day and night
- Automatically dim based upon ambient light-reducing glare
- Solar or AC power supply optional
- Environmentally friendly solar power supply, easy to install and maintain
- Can connect to the ELLUMIN Cloud for better solving traffic problems and managing traffic orders
Activation Equipment
1. Push Button-PB-002(optional)
-When the pedestrian who will cross the crosswalk pushes the button, the pre-warning system starts
- Attractive push-button
2. Push Button-PB-001(optional)
-When the pedestrian who will cross the crosswalk pushes the button, the pre-warning system starts
3. Intelligent Pedestrian System Camera (optional)
-As pedestrians move into the detecting area, the pre-warning system starts
- Directional discrimination function (only detects the pedestrian who is or will cross the crosswalk for activating the pre-warning system)
- Freely set detection area
- Freely set detection targets
4. Intelligent Infrared Bollards(optional)
-When pedestrians cross between the infrared sensing bollards, the pre-warning system starts
- One-directional discrimination function (only detects the pedestrian about to cross the crosswalk for activating the pre-warning system)
- People flow data collection function
Warning Equipment
1. RRFB(Rectangular Rapid Flashing Beacon)
-Once the pre-warning system starts, the RRFB light bars toward to drivers flash for warning drivers there ahead pedestrians will cross the crosswalk, please slow down and give way.
- Meets MUTCD IA-21
- Daytime visible light design performs greatly at day and night
- Automatically dim based upon ambient light-reducing glare
2. Road Stud(optional)
-Once the pre-warning system starts, the led lamps toward to drivers flash for warning drivers there ahead pedestrians will cross the crosswalk, please slow down and give way.
- Adopt daytime visible light design for effective warning in daytime and nighttime
- Sturdy and Durable:Can bear more than 30 Tons
- Waterproof and Dustproof:Protection level reaches up to IP68
- Quick installation and minimum damage to the road. 24pcs solar road studs installation in a path just needs 6 hours.
- Split structure design for easy maintenance, low maintenance cost
FAQ & Contact us
