43512-3020
18 Months From Purchasing
18 Months From Purchasing
Brake Drums
Iron
Rear
ISO/TS16949, ISO9001, DOT, ECE
Drum
Brake Drum
South America, North America, Eastern Europe, Northern Europe
406mm
270mm
335mm
10
282 mm
26mm
213mm
Pujie
Pallet
SGS, ISO, TS16949
Qingdao, China
870830990
Product Description
1. Description of brake drum 43512-3020
2. Introduction :
3. Company Information :
Qingdao Pujie Industry Co., Ltd. is a worldwide leader, specializing in disc brake pads and shoes,brake discs and drums for all makes and models of passenger and commercial vehicles. PUJIE continuously strives for high level of customer satisfaction, by maintaining high quality raw material, advance production technology and fast delivery.
PUJIE products are manufactured under ISO/TS 16949 & ISO 9001 certifications to ensure the highest level of quality.
4. Factory show:
| Test Certification Report | |||||||||
| Test Report No. : PJ1201206 | Inspection Manufacturer : Qingdao Pujie Industry Co. Ltd | ||||||||
| Export Series | Brake Drum | Technical Requirement | Sampling Inspection | Test Result | Disqualification | Result | |||
| n | Ac | Re | |||||||
| A | Strength of extention Rm,Mpa | ≥220 | 1 | 0 | 1 | 234 | 0 | √ | |
| Hardness,HBW | 180~240 | 194 | |||||||
| Metallographic Structure | Graphite Sgape | A Shape≥90% | 1 | 0 | 1 | √ | 0 | √ | |
| Grapgite Length | 3~5 Level | 5 Level | |||||||
| Pearlite Quantity | ≥95% | ≥95% | |||||||
| Varbide Quantity | 1~2 Level | 1 Level | |||||||
| Phosphide Eutectic | 1~2 Level | 1 Level | |||||||
| Chemical Component Analysis,% | C | 3.3~3.7 | 1 | 0 | 1 | 3.5 | 0 | √ | |
| SI | 1.4~2.0 | 1.6 | |||||||
| Mn | 0.5~0.9 | 0.8 | |||||||
| P | ≤0.12 | 0.08 | |||||||
| S | ≤0.10 | 0.07 | |||||||
| B | Surface Quality | Casting Compent | 1. Washed by shot blasting machine 2. No residual oxide , no residual sand, has no butt, casting fin or air buddle | 1 | 1 | 2 | √ | 0 | √ |
| Brake Drum | No cold shut, no crack, no cinder pig, no pore and so on | √ | |||||||
| Surface of brake drum | No grease dirt | √ | |||||||
| Form and location tolerance | Surface of friction cylinder radial full indicator movement,MM | ≤0.20 | 0.18 | ||||||
| Surface Roughness Ra,μm | Surface of friction cylinder touch brake lining | ≤3.2 | <3.2 | ||||||
| Position cylinder surface,set wheel hub | ≤3.2 | <3.2 | |||||||
| Innner and out of drum disc connect place | ≤6.3 | <3.2 | |||||||
2. Introduction :
3. Company Information :
Qingdao Pujie Industry Co., Ltd. is a worldwide leader, specializing in disc brake pads and shoes,brake discs and drums for all makes and models of passenger and commercial vehicles. PUJIE continuously strives for high level of customer satisfaction, by maintaining high quality raw material, advance production technology and fast delivery.
PUJIE products are manufactured under ISO/TS 16949 & ISO 9001 certifications to ensure the highest level of quality.
4. Factory show:
