Y018 Hand-hold Rock Drill
CE
New
Customized
Pneumatic
Any Color
OEM
Air Drill
Reciprocating Type
Pulse pneumatic wrench
Tunnel
Qianshao
Semi-automatic
Hand press
GM
Cartons
CE
China
Product Description
Model Y018 Hand-hold Rock Drill
InstructionThe rock drill is used for rock drilling, blasting holes and other drilling works in the quarries, small coal mines and other constructions.
It's suitable for drilling of horizontal or inclined holes on the medium-hard and hard rock. When it's matched with air leg Model FT100, it can blast holes from different directions and angles.
Blast hole diameter is between 36mm and 42mm. with an efficient depth from 1.5m to 2m.
It's recommended to be matched with Model py-1.2/0.39 air compressor which is powered by Model RS1100 diesel engine. Other suitable air compressors can also be matched with this rock drill..
Specification
| Weight | 18kg |
| Overall length | 550mm |
| Cylinder dia. | 58mm |
| Piston stroke | 45mm |
| Air pipe inner dia. | 19mm |
| Water pipe inner dia. | 8mm |
| Shank dimensions | 22×108mm |
| Water pressure | 3.9-5.9×105Pa |
| Air pressure | ≤at 3.9 MPa |
| Air consumption (at3.9×105 Pa ) | <1.2m3 /min(22.6L/S) |
| Average speed (at 3.9×105Pa ) | 80mm |
| Impact energy(at4.9×105Pa ) | 24.5J(31Hz) |
| Torque(at4.9×105Pa ) | 7.85N·m |
| Airconsumption(at4.9×105Pa ) | ≤1.35m3 /min |
| Average speed(at4.9×105Pa ) | 120mm |
FY200 oil lubricator
| Weight | ≤1.2kg |
| Oil capacity | 200mm |
FT100 air leg
| Weight | 11kg |
| Propulsion stroke | 810mm |
| Cylinder dia | 52mm |
| Length | 1312mm |
