Crawler Mounted Portable Water Well Drilling Rig Core Drill Rig Drill Tool

XY-2BL Water Well Drilling Rig with crawler


APPLICATIONS:

XY-2BL rig is developed based on our XY-2 core drilling rig, integrating drilling rig, crawler, mud pump, console rack and other devices into the integral one. It is mainly targeted at the shallow-medium hole of geology core drilling, and where the mobility is important. It is modular and integral drilling rig.



FEATURES:

1. Integrated crawler, rig, mud pump, console racks;
2. Crawler, the whole support rigs and tower with ups and downs are controlled by the hydraulic system of the rig, easy to operate and transport;
3. The whole set of equipment can move to relocate, improve drilling efficiency, reduce labor intensity;
4. The tower has the function of ups and downs, folding, easy walking and transportation;
5. Rig with more (8 block) the speed of progression and reasonable speed range, and the relatively large low-speed torque, wide range of application.
6. Rig has two reverse gear speeds, easy to deal with incidents;
7. Rig has longer feed stroke as long as 600mm, will help improve drilling efficiency and reduce blocking drill, burning accidents;
8. Rig has double oil pump, less power consumption, lower oil temperature of hydraulic system;
9. Rig has few control levers, rational layout, flexible and reliable operation;
10. In addition there is a normally closed upper hydraulic chuck on, but also with lower mechanical man-powered chuck.

Crawler Mounted Portable Water Well Drilling Rig Core Drill Rig  Drill Tool

1	Drilling depth (NQ drill rod)		Approximately 500m
2	Spindle speed		Forward	57;99;157;217;270;470;742;1024
			Reverse	45;212  r/min
3	Spindle Maximum torque		3200 N@m
4	Spindle max pulling force		60 KN
5	Spindle stroke		600 mm
6	Max. lifting force of the hoist with single rope		30 KN
7	Inner diameter of the spindle		96 mm
8	Retraction distance		305 mm
	Retraction distance for the host drill rig		330 mm
	Retraction distance for both drill rig and tower		160 mm
10	Oil pump		SCB32/12 double gear pump
11	Power unit	engine power	30 KW    1500 r/min
		electric motor	22KW  1470 r/min
12	Crawler maximum walking speed		1.2  km/h
13	Crawler Climbing capacity		25°, no more than 25 °
14	Tracked Ground pressure		0.042  MPa
15	Rig height		8 m
16	Hook load of the tower		29.4 kN
17	Max.static load of crown block beam		58.8 kN
18	Quantity of pulley		2
19	Angle range of tower ups and downs		0°~90°
20	Rig Dimensions ( tower horizontal position )		(L*W*H) 4450×2166×3080  mm
21	Total weight		about 5500 kg

Crawler Mounted Portable Water Well Drilling Rig Core Drill Rig  Drill Tool

Crawler Mounted Portable Water Well Drilling Rig Core Drill Rig  Drill Tool