The compressed garbage truck is composed of sealed garbage box, hydraulic system and operating system. The whole vehicle is fully sealed, self-compression, self-dumping, the sewage in the process of compression into the sewage box, more thoroughly solve the problem of secondary pollution in the process of garbage transportation, to avoid inconvenience to people, the key parts are imported parts, with high pressure, good sealing, easy operation, safety and other advantages. Optional rear hanging bucket flipping mechanism or garbage bucket flipping mechanism.
Advantages of garbage trucks:
1.Simple garbage collection method: change the dirty and old appearance of garbage cans all over the streets in cities, and prevent secondary pollution.
2.High compression ratio and large loading capacity: the maximum crushing pressure reaches 12 tons, and the loading capacity is equivalent to two and a half times that of the same ton of non-compressed garbage.
3.Operation automation: computer control system is adopted, all the loading and unloading operations need to be operated by one driver, and two operation modes, fully automatic and semi-automatic, can be set, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.
4.Good economy: when the special equipment is working, the computer control system automatically controls the throttle.
5.Double insurance system: The operating system has dual functions of computer control and manual operation, which greatly guarantees and improves the utilization rate of the vehicle.
6.Turning mechanism: a turning mechanism with a trash can (or bucket) is optional.
| Cab | Flat top | |
| Dimensions (mm) | 8500×2500×3400 | |
| Curb weight (kg) | 12000kg | |
| Load (kg) | 18000kg | |
| Engine | 266PS | |
| Driving form | Steering wheel, right-hand drive | |
| ABS | Have | |
| PTO | Have/HW70 | |
| PTO connector | Have | |
| Steering machine | ZF8198 | |
| Cab | Sinotruck HW76 cab | |
| Front axle | 7tons | |
| Rear axle | 16tons | |
| Gearbox | Siontruck 10-speed transmission | |
| Truck frame | Through reinforced girder | |
| Tires | 295/80R22.5 vacuum tyre 6 sets | |
| Front / rear(mm) | Front: 1500, Rear: 2850 | |
| Departure corner | Front: 16, Rear: 15 | |
| suspension | Leaf spring 10/9+6 | |
| Leaf spring | Front 10, rear 9+6 | |
| Number of axles | 2 | |
| Wheelbase (mm) | 4600 | |
| Number of tires | 6+1 | |
| Track | 2022/1830 | |
| Drive type | 4*2 | |
| engine | WD615.62 | |
| Emission Standards | Euro 2 | |
| Brake | Drum / air brake | |
| Braking System | Air brake | |
| Spare tire frame | Have | |
| light | Have | |
| Voltage | 24V | |
| Toolbox | Have | |
| colour | According to user requirements | |
| Partial configuration | ||
| Material and thickness of refuse compartment | Q345 low alloy anti-corrosion wear plates (manganese steel) 5mm sides, 5mm bottom, 5mm side plates5mm | |
| Body shape | Curved compartments | |
| Emergency stop button | Have | |
| Safety control system | Have | |
| Sewage tank | Have | |
| Tail electric control unit | Have | |
1. What is your MOQ?
A:One unit.
2. Can you meet my special requirements?
A:Sure! We are a direct manufacturer, we have strong production capacity and research and development capabilities!
3. How is the quality of your products?
A:High quality has always been our advantage. We all use high-quality branded materials with 100% quality assurance. A procedure is established to inspect products, raw materials, process materials, finished materials that have been verified or tested, etc.at all stages of the manufacturing process.
4. How can I get the price of your vehicle?
A:You can contact us through any of the following contact methods. Our personalized service staff will reply you within 24 hours.
5. Is it possible to print our own brand on the vehicle?
A:It's totally acceptable.
6: What is the delivery time?
A:The delivery time is within 30-50 working days after receiving your prepayment.
