160HP Foton Aumark 5tons crane mounted tuck
A crane mounted on a truck carrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower. In older model designs of hydraulic truck cranes, there were two engines. One in the lower pulled the crane down the road and ran a hydraulic pump for the outriggers and jacks. The one in the upper ran the upper through a hydraulic pump of its own. Many older operators favor the two-engine system due to leaking seals in the turntable of aging newer design cranes.
| Vehicle model | AUMARK-T43 | |
| Cabin | Single row/W1800/left rudder | |
| Whole vehicle main dimensions | Overall dimensions (LxWxH)mm | 5975×1925×2230 |
| Wheel base(mm) | 3360 | |
| Weight data | Curb weight(kg) | 2300 |
| Gross vehicle weight(kg) | 5500 | |
| Persons in cab | 3 | |
| Whole vehicle main performance | Max. speed(km/h) | 95 |
| ENGINE | Model | 4J28TC |
| Emissions standards | Euro4 | |
| Displacement(L) | 2.771 | |
| Rated Power(kw/rpm) | 81 | |
| Max torque (N.m/rpm) | 280 | |
| Gearbox | Model | 6T100 |
| Front axle | Type/Mainreducetion ratio | 2.2T |
| Rear axle | Type/Mainreducetion ratio | 5.0T/5.375 |
| Suspension | Front suspension/Leaf spring number | 3+1 |
| Rear suspension/Leaf spring number | 6+7 | |
| Brake system | Service brake | Drum pneumatic braking |
| Parking brake | Brake gas brake | |
| Auxiliary brake | Engine exhaust brake | |
| Wheels and tyre size | 6+1( 7.00R16) | |
| Crane requirements | Type/Position | Straight arm/front |
| crane | SQ3.2SK2Q | |
| Rotation angle | 360°Full rotation | |
| Subframe | Material/plate thickness | Longitudinal beam :Q345/10mm Beam: Q345/8mm |
| Cargo box | size | 4170*2100*400mm |
