SLS5160GPSD3
Available at Foton Overseas Service Station
12 Months
10000L
ISO9000, CCC, CE
Euro 3
Manual
10 Ton
Diesel
4×2
9.726L
New
GLS
8310X2500X3200mm
GLS
Nude Packing
Suizhou, Hubei, China
8704223000
Product Description
Surplus 270HP Foton Water tank Truck 10000 Liters Stainless Steel Water Tanker
This tanker is manufactured in accordance with the American standard, which is the most strict standard in the world.
Food grade stainless steel can resist the oxidation of chemical substances, and it can be used normally in high temperature, high salinity, high humidity, high corrosion and acidic environment, and it does not rust all the year round.
The tanker material is in food grade stainless steel 304-2B, can transport drinking water, pure water, milk, beer, alcohol, wine, drinks, Juice and so on.
According to customer requirement, this tanker truck can also be adjusted to Water Truck or Fuel Tank Truck(Refueling Truck with Fuel Dispenser).
This tanker is manufactured in accordance with the American standard, which is the most strict standard in the world.
Food grade stainless steel can resist the oxidation of chemical substances, and it can be used normally in high temperature, high salinity, high humidity, high corrosion and acidic environment, and it does not rust all the year round.
The tanker material is in food grade stainless steel 304-2B, can transport drinking water, pure water, milk, beer, alcohol, wine, drinks, Juice and so on.
According to customer requirement, this tanker truck can also be adjusted to Water Truck or Fuel Tank Truck(Refueling Truck with Fuel Dispenser).
| 10M3 Stainless steel tank truck | ||
| Truck chassis configuration | ||
| Vehicles model | BJ5182GSS-1 | |
| Truck main size | Overall size (L×W×H)mm | 8110×2500×3160 |
| Driven type | 4×2 | |
| wheelbase(mm) | 4600 | |
| Wheel track(F/R)mm | 2010/1865 | |
| Quantity configuration | Curb weight(kg) | 7004 |
| Rated payload(kg) | 10866 | |
| Rated allowance(person ) | 3 | |
| GVW(kg) | 18000 | |
| Truck main Specification | Max speed(km/h) | 89 |
| Max climb(%) | 38 | |
| Engine | Model | WP10.270E32 |
| Placement (L) | 9.726 | |
| Power @ rated speed(kw/rpm) | 199/270(2200) | |
| Max torque@speed(N.m/rpm) | 1100(1200-1600) | |
| Transmission | Model | 9JS119T-B(Q)(PTO) |
| Clutch | Model | φ430 diaphragm spring clutch |
| Rear axle | Type /final drive radio | 13T double reduction /4.8 |
| Suspension | Front suspension / Spring plate | Vertical leaf spring + cylinder shock absorber 9pcs |
| Rear Suspension / spring plate | Longitudinal main and auxiliary leaf springs,9+6 | |
| Steering | AM75L | |
| Brake system | Service brake type | Double loop pneumatic drum type |
| Parking brake type | Energy storage spring air brake | |
| Auxiliary brake | Engine exhaust brake | |
| Tire number & size | 6+1/11.00R20 | |
| Fuel tank (L) | 380 | |
| Basic configuration | Manual cab lift, airbag seat, manual rearview mirror, glass lifter, air conditioner | |
| Body configuration | ||
| A.TANK BARREL | ||
| 1. Tank Profile | Round shape | |
| 2. Test pressure | Hydrostatic test to5 psi (35 Kpa) on each compartment. | |
| 3. Working pressure | Atmospheric. | |
| 4. Capacity | 10000L plus 3~5% ullage | |
| 5. Compartments | Single compartment. | |
| 6. Interior weld finish | Not polished or grind (W-0). | |
| 7. Exterior weld finish | Not polished or grind (W-0). | |
| 8. Shell material | Stainless steel 304 2B. | |
| a) Top | 3.7mm nominal. | |
| b) Sides | 3.7mm nominal. | |
| c) Bottom | 3.7mm nominal. | |
| 9. End Plate | Stainless steel 304 2B, 3.7mm nominal. | |
| All single heads dished and flanged | ||
| 10. Bulkhead | Nil. | |
| 11. Baffle / Surge Heads | Stainless steel 304 2B | |
| Dished with flap. | ||
| 1 pc | ||
| 12. Spill molding and rollover protection | Stainless steel around the dome with drain hose. | |
| 13. Spill molding lids | Nil. | |
| 14. Outer rings | 304-2B stainless steel, 60mm height, 3mm nominal, continuously welded | |
| 15. Frame | Carbon steel independent. | |
| 16. Loaders and bracket | Carbon steel. | |
| 15. Isolation | Nil. | |
| 16. Exterior lining | Nil. | |
| B. TANK FITTINGS AND PIPING | ||
| 1. Manholes | 20" diameter with 6 stainless steel wing nuts, located at the top center | |
| 2. Pressure Vacuum Vent | Two per compartment. 6~12 kPa pressure, 2~4 kPa vacuum. | |
| Chinese Brand | ||
| Nil. | |
| 4. Discharge system | 3" diameter discharge with 3" diameter butterfly valve, 3" stainless steel male cam-lock coupling and quick cap, located at the back of the tank. | |
| 5. Pipin | Nil. | |
| 6 Thermometer | Nil. | |
| 7. Steam trace | Nil. | |
| 8. Overfill Prevention | Nil. | |
| 9. Tow Hook | Nil. | |
| 10. Product Indicators | Nil. | |
| C. ACCESSORIES | ||
| 1. Ladder | Stainless steel, 400mm wide, with non skid rungs and lateral handles, mounted at right middle of tanker. | |
| 2. Walkway | Extruded aluminium around dome. | |
| 3. Hose Carries | 1 no, hose carrier (round tubes) to fit Ø159 x 6meter (236") hose close type complete with brackets to be installed at the right side. | |
| 4. Hose | Firemen type flexible discharge hoses, 3" for discharge,and flexible plastics suction hoses, 5.9m 3"for suction, 3" female cam-lock coupling at both ends. | |
| 5. Motor Pump | BRIGGS & STRATTON Gasoline motor , 4 stroke motor, fuel tank capacity 4.0 liters of gasoline, WB30 pump with a 3" input and outlet diameter, 7m suction head, discharge capacity 900L/min (238Gal/min) pump head pressure 33 m, weight 30kg. | |
| 6. Toolbox | Nil. | |
| 7. Rear Bumper | Aluminium member to accommodate light assembly and number plate to cover full width of the tank | |
| Steel bumper with ground clearance 500mm approx. | ||
| 9. Hazchem Plate | Nil. | |
| 10. Mudguard | Aluminum over suspension and the upper coupler. | |
| Mud flaps rigid plastic at the rear. | ||
| 11. Lights & Wiring | 24V. ISO 1185 7 pin socket. | |
| Harness: oil and vapour proof cable. | ||
| Front: nil. | ||
| Side | ||
| Mark lamp 3Pcs/side | ||
| Reflector 3Pcs/side | ||
| Turning lamp 1Pcs/side, LED. | ||
| Rear Bump: | ||
| Reverse lamp R-L 2Pcs. | ||
| Turning lamp R-L 2Pcs. | ||
| Brake lamp R-L 2Pcs. | ||
| Register plate light | ||
| Rear top: YES. | ||
| Brand of Wiring: Phillips | ||
| 12. Reverse alarm | Nil. | |
| 13. Connector Box | At the center in the front dishend | |
| 14. Sticker | 50mm wide red-white reflective sticker, mounted at both sides and rear bump. 50mm | |
| 15. Hand rail | Nil. | |
| 16. Fire Extinguisher | 8kg , 2Pcs. | |
| Carbon steel extinguisher holder located on the landing gear on the curb side. | ||
| 17. Drains hose | water drains hose 2", installed at the back of spill molding | |
| 18. Wheel chocks | Nil. | |
| 19. Traffic cone | Nil. | |
| 21. Spare wheel bracket | 1set | |
| Carbon steel, basket type, located behind the landing gear. | ||
| 21. Painting | Polyurethane medium Aluminium gray, applied over epoxy primer on carbon steel element | |
