Chusheng Vehicle is a professional manufacture in truck industry, and we can provide various configuration trucks with different prices.
Garbage compactor truck also known as garbage truck,compressed garbage truck,refuse collection truck,waste collection vehicle,dirt-wagon,dust cart trash truck,dustcart and bin lorry,which is a special purpose vehicle used to collect and transport all kinds of garbage in municipal sanitation department.
Advantage:
1.The garbage box is made of high strength wear resistant steel plate,prolonging box service life.
2.Top China brand cylinders and multi-way valve,high hydraulic pressure and high compression ratio up to 2.5:1,ensuring better loading capacity.
3.Intelligent integrated control panel,easier to operate and greater efficiency;the muti-way valve control always available just in case.
4.Two sewage tanks system:one sewage tank under loading container,the other sewage tank under garbage box.All sewage goes into the tanks to avoid dripping during compacting and transportation.
5.Compression box capacity from 3-22 CBM.
6. Various types of garbage bin lifting device available.
Product Details
| Chassis model | ZZ1257N4341W | Chassis brand | SINOTRUK |
| Overall dimensions | 9800X2496X3048mm | Wheel base | 4325+1350mm |
| Front/rear wheel track | 2022, 1830/1830mm | Front/rear suspension | 1500, 2600mm |
| Approach/departure angle | 16/15° | Maximum speed | 90km/h |
| Chassis Manufacturer | China National Heavy Duty Truck Group Co.,Ltd | ||
| Cab | Configuration | HW76 a row and a half deluxe cab(with sleeping berth), allowable 3 passengers | |
| Color | White, other color is optional | ||
| Engine | Model | WD615.69 | |
| Emission | Euro 3 | ||
| Type | 6 cylinders, in-line, 4-stroke, water cooled, turbo inter-cooling, direct injection, diesel engine | ||
| Rated power | 336hp, rated power speed 2200rpm | ||
| Displacement | 9726ml | ||
| Max.torque | 1350N.m | ||
| Bore x stroke | 126x130mm | ||
| Manufacturer | China National Heavy Duty Truck Group Co.,Ltd | ||
| Tire | Size | 12R22.5 tubeless tire | |
| Number | 10+1 nos | ||
| Clutch | φ430 diaphragm clutch | ||
| Fuel tank | 400L iron oil tank | ||
| Front axle | HF 7 tons | ||
| Rear axle | ST 16 tons | ||
| Drive form | 6X4 | ||
| Suspension | Multi leaf springs | ||
| Rated voltage | 24V, DC | ||
| Transmissions | gearbox HW19710, 10 speed forward 2 reverse. | ||
| Steering device | Power assisted steering | ||
| Steering wheel | Left hand drive | ||
| If there is a slight change in the chassis parameters above, please take the actual product as the standard | |||
Refuse compactor structure parameters | |
Equipment | |
Structure | Body, sub frame, lifting rear part, the loading device, the pushing-out plate, hydraulic and electric systems |
Loading capacity | 18m3 |
System of loading | Mechanized, rear loading |
Modes of the pressing | Manual,semi-automatic,automatic,lifting rear part operation manual,loading,pushing,pressing, pushing out automatic |
Body | |
Version | All-metal |
Shape | arc-shaped |
Sidewalls | Sheet carbon steel (thickness: 4 mm) |
Bottom | Sheet carbon steel (thickness: 4 mm) |
Roof | Sheet carbon steel (thickness: 4 mm) |
Front frame | Sheet carbonaceous steel (thickness: 5 mm) |
Rear frame | n-shaped profile from sheet carbon steel (thickness:5 mm) |
Basis | 120x120mm (thickness: 5 mm) |
Loading bunker | |
Loading bunker | All-metal with sidewalls and a loading ladle |
Volume | 1.8 m3 |
Sidewalls | Sheet carbon steel (thickness: 4 mm) |
Ladle floor material | Sheet carbon steel (thickness: 4 mm) |
Liquid drain | Drainage channel,sewage tank |
Working zone Lighting | 2 lamps |
Mechanism of raising | Two hydraulic cylinders |
Ensuring tightness | Between the body and lifting back part in the lower part profile acid-proof rubber is used. |
Pressing system | |
Features | Control mode diversification,bidirectional compression |
Pressure | 16Mpa |
Compaction ratio | 3.0:1 |
Loading cycle | 25-30 second |
Unloading cycle | 15-20 second |
pressing mechanism | The giving plate and hinge related pressing plate moving on two directing bars |
Pressing mode | Automatic pressing (1 full cycle and continuous pressing) and controlling of each cycle of pressing separately |
Control of pressing | Control from the external panel on the bunker |
Lifting rear part | |
Mechanism of lifting | Two hydraulic cylinders |
Function description | Suitable for various rubbish bins |
Others | |
Color and Logo | Optional |
Standard configuration | Chassis,arc-shaped body,sub frame,rear lifting part,loading bunker,pushing-out plate,hydraulic system,pressing system,sewage tank,climbing ladder,pneumatic control. |
Selective configuration | PLC electric automatic control,multifunctional rear lifting part,rear handrail and footplate,other shapes of body,rear swing arm,and etc. |
RORO: The truck is driven to the ship inside directly and fixed well. It can protect the truck being rusty and broken during shipping.
BULK: The truck is lifted by crane then put on the vessel deck. This model is much cheaper.
CONTAINER: The truck is put into the container. This model is used for small model trucks
1. HUBEI CHUSHENG VEHICLE CO.,LTD. is a famous and one of the biggest manufacturer with professional experience in special automobile field for more than 20 years in China. We have more than 3000 workers, 400 technicians, and factory scale is more than 700,000m2.
2. Our most advantage and leading products including LPG tanker series, Water Tank, Fuel tank, Refrigerated Truck, Garbage Truck, Towing/Wrecker truck, Dump Truck, Sewage Suction Truck, Concrete Mixer Truck, Bulk Cement Truck, Van Truck, Sweeper Truck, Truck with Crane, Fire fighting Truck, High-altitude Operation Truck, Chemical Liquid Truck, Milk Transport Truck, LED Display Truck, Various Semi-trailer, Spare parts etc.
3.We have successfully exported to more than 60 countries, such as Ghana, Togo, Sudan,South Sudan,Kuwait, Peru, Nigeria, Benin, Angola, Tajikstan, Azerbaijan, Namibia, Burma, Korea, Iran, Afghanistan, Iraq, Philippines, Vietnam, Saudi Arabia, Mexico, Chile, Bolivia, Tanzania, Zambia, Zimbabwe, Yemen etc.
4.We have strict quality control of raw material, professional management team and technical workers, advanced equipments, strict inspection before delivery, excellent packing and shipping team.
HUBEI CHUSHENG VEHICLE CO.,LTD. has a perfect service system, including pre-sale service, in-sale service and after-sale service. To provide high quality service for our customers, we train every salesman with necessary product maintenance knowledge and organized a Technology Supporting Department with a group of excellent and professional engineers. Any problem you can contact us at any time you like.
Pre-sale service:
1. Reply enquiries in 24 hours.
2. Market research and forecast for customer.
3. Provide unique and professional solutions based on customer's requirement.
4. Data sheet and samples offer.
5. Other services, such as special packing design, factory visiting and so on.
In-sale service:
1. Tracking report in producing.
2. Quality test report for every order.
3. Photos and videos as per customer's requirement.
4. Free spare parts.
After-sale service:
1. Lifetime free maintenance and upgrade.
2. Complaint respond period not exceed 24 hours; maintenance guidance and problem solution supplied in 48 hours.
3. Customer satisfaction tracking report.
4. Free technician training.
5. Full set of documents free of charge, which including installation guidance, software operation manual, easy maintenance manual and control system software CD and so on.
6. Special service for big project, such as stadium, exhibitions, squares and so on.
Q: What's your advantage in price?
A: :Competitive price. We have our own work shop and 500 engineers for our trucks and trailers. We are the direct selling and no middle man in the selling processes of our manufactured truck and trailer. From numerous comparison and feedbacks from our clients, our price is the most competitive in the market.
Q: How do you control the quality of product?
A:We have more than 300sets of advanced special purpose vehicle production and testing equipments, and have formed seven special purpose production lines,which can produce 20,000 special purpose vehicles each year.our workers are well trained and most of them work in this industry more than 10 years. Every unit of product undergoes several rigorous inspections in the manufactre process.
Q:How about the delivery time?
A: Most of our trucks and trailer need to be customized,normally we need around 30 days for production.We also have some popular trucks and trailers stock can deliver to you within 7 days.
Q: Do you accept custom customized order? What's is your MOQ order?
A:Yes, we do, our MOQ is 1 unit.
Q: What's the payment terms?
A:T/T term and L/C optional. For T/T 30% down payment is required in advance,70% balance shall be settled before delivery.
Q: How about shipment?
A:For oversea customer, we will ship our truck and trailer by 20FT container, 40FT container,40FT high container, open-top container, flatbed container, Ro-Ro ship or bulk ship according to the size the products.
For neighborhood countries of China, such as Mongolia, Myanmar, Vietnam etc, we delivery our truck by road or railway.
Your are always welcome to visit our factory at any time.
For more information for trucks and trailers, please contact:
HuBei ChuSheng Vehicle Co., Ltd.
Factory: NO.9, Jiliang Avenue, Suizhou Economic Development Zone,Suizhou, Hubei, China
Office: Room 1108, Eurasia Plaza, No.20 Jinyinhu Road, East- west lake District, Wuhan, Hubei, China.
