Y37710
Manual Instruction
1 Year
0-60L/min
1"
Self Closure Fuel Nozzle
1.5kg
1.8kg
Red/Blue
yaojienter
1PCS/Box
20pcs/carton
China
8413302900
Product Description
Automatic Oil Nozzle
It is an auto nozzle for diesel, petrol, fuel which is suitable for pump system only. Its inlet thread for refueling is 1" BSP (F). With a flow rate of 18-60 liter/min, and "Accu-stop" flow control, it can refuel lubricant precisely.
All the automatic nozzles which
shipped from the factory having been
tested strictly. Its up to the
international standard in auto-off
sensibitity,airtight and other qualities.
The following instrirons are
provided to enable you to properly
install, operate, and maintain your
automatic nozzle.
INSTALLATION
1.Apply a suitable thread sealant for
the body thread of NPT.
2.Use an O-shaped rubber seal for the
body thread BSP.
3.Tighten up the connector swivel
carefully, avoid over lightening in case
the body cracks.
OPERATIONAL
MAINTENANCE
There are three-steps switch on the
handle for oil filling controlling with the
Different flow.
The nozzle will shut off when the
bottom of the nozzle was submerged
by the oil or bubble.
If spillage or bubble make oil gun
off, can stay foam disappear
otolaryngologist shot.
By using the three-steps
switch ,without hands, control the
barrel of the available on the slippery
spring stuck in the tank to go on until
its full
