| load capacity:4ton | power supply:AC220/380V 50HZ/60HZ |
| horse power:3HP | max lifting height:1800mm |
| power:2.2kw | raise time:12 seconds |
| secondary jack lifting height:500mm | secindary lift capacity:3 tons |
1. Hydraulic cylinder:3 hydraulic cylinders on one side (2 in the front and 1 in the back),1 hydraulic cylinder on each side of the secondary lift , a total of 8 hydraulic cylinders, make the lift lift up more quickly, and the X-arm is safer and stronger during the lifting.Other manufacturers only have 6
hydraulic cylinders.
2. Unlocking cylinder: double cylinder safety device, 2 cylinders on one side (located next to the hydraulic cylinder at the back), one is broken, the other still works, a total of 4 cylinders, separate the safety teeth more powerfully and quickly lift up.
3. The wire is different from other manufacturers.
Control system: There are two valves, one to control the oil outlet and the other to control the oil return. Pump station (motor): The wire is copper wire, the shell is all aluminum alloy, and the heat dissipation is fast Oil-Water Separator: Filters water and oil, reducing breakdowns and
extending machine life
4.It adopts U-shaped steel, the material is strong and the bearing capacity is large. There are balls in the bearing, which is wear-resistant and has a long service life. The length of the platform is 4.5 meters, but a trolley of 5-6 meters can also be used, because it only depends on the wheelbase.
1.It adopts U-shaped steel, the material is strong and the bearing capacity is large.
2.There are balls in the bearing, which is wear-resistant and has a long service life.
3.The length of the platform is 4.5 meters, but a trolley of 5-6 meters can also be used, because it only depends on the wheelbase.
