TSP-01-12
Tee Type
Resistive
Contact
Analog Type
Normal Wirewound
PT1000
Temperature
IP68
CE
Customized
yuanben
Standard Export Package
Shanghai
9033000000
Product Description
TSP-01-12 Fast Response Temperature Sensor with Pt 1000 Resistor
Fast-responding temperature sensor for measuring rapid temperature changes in heat exchangers. Pt 1000 resistor value is conforming to Class B of DIN EN 60751. and used in compact heat exchangers which only have a fairly small mass with a low heat storage capacity. As a result, the temperature in the heat exchanger can change rapidly.
The TSP-01-12 Temperature Sensor has been especially designed for domestic hot water heating in instantaneous heating systems. The sensor is primarily used in conjunction with Electric Actuators Controllers.
Features
• Response time only 2.2 seconds measured in flowing water (0.4 m/s)
• Minimal thermal resistance and a low heat capacity
• 52-mm-long immersion tube
• Easy to install
Technical data
Measuring element 1 Pt 1000 (DIN EN 60 751, Class B) Two-wire circuit
Perm. medium temperature -5 to 90 °C
Perm. ambient temperature -5 to 80 °C
Time constants (medium: water 0.4 m/s) 2.2 seconds
Nominal pressure PN 16
Degree of protection IP65
Immersion depth 52 mm
Mechanical connection Screw thread G ¼
Electrical connection Free cable end fitted with wire end
ferrules with plastic sleeves
Connecting cable length 2000 mm
Sensor pocket
Mechanical connection Male thread G ¾
Female thread G ¼
Coupling nut G ¾ or G 1
Nominal pressure PN 16
Materials
Mechanical connection Brass (2.0401.20)
Protective tubing Stainless steel Inconel 600 (9.4816)
Connecting lead Silicone
S
ensor pocket Red casting brass CC3301,
Ordering text
Accessories: Sensor pocket with coupling nut (G ¾ or G 1) and gasket
Photos
Fast-responding temperature sensor for measuring rapid temperature changes in heat exchangers. Pt 1000 resistor value is conforming to Class B of DIN EN 60751. and used in compact heat exchangers which only have a fairly small mass with a low heat storage capacity. As a result, the temperature in the heat exchanger can change rapidly.
The TSP-01-12 Temperature Sensor has been especially designed for domestic hot water heating in instantaneous heating systems. The sensor is primarily used in conjunction with Electric Actuators Controllers.
Features
• Response time only 2.2 seconds measured in flowing water (0.4 m/s)
• Minimal thermal resistance and a low heat capacity
• 52-mm-long immersion tube
• Easy to install
Technical data
Measuring element 1 Pt 1000 (DIN EN 60 751, Class B) Two-wire circuit
Perm. medium temperature -5 to 90 °C
Perm. ambient temperature -5 to 80 °C
Time constants (medium: water 0.4 m/s) 2.2 seconds
Nominal pressure PN 16
Degree of protection IP65
Immersion depth 52 mm
Mechanical connection Screw thread G ¼
Electrical connection Free cable end fitted with wire end
ferrules with plastic sleeves
Connecting cable length 2000 mm
Sensor pocket
Mechanical connection Male thread G ¾
Female thread G ¼
Coupling nut G ¾ or G 1
Nominal pressure PN 16
Materials
Mechanical connection Brass (2.0401.20)
Protective tubing Stainless steel Inconel 600 (9.4816)
Connecting lead Silicone
S
ensor pocket Red casting brass CC3301,
Ordering text
Accessories: Sensor pocket with coupling nut (G ¾ or G 1) and gasket
Photos
