JD213HF-C
Warning Traffic Light
Road Construction, Railway, Parking, Tunnel, Road
Green Signal, Red Signal, Flash Alarm Signals, Direction Signals, Traffic Signal Wand, Lane Signals, Crosswalk Signal, Command Signal
Timing Control
CE, FCC
Metal Shell
LED
Circle
Φ300mm
100mm
High Flux LED
IP65
<20%
-40ºC~+70ºC
Avg. ≥30° Down ≥30°
12-24VDC 120VAC 230VAC
Tinted Len
>0.9
Red and Green
5 Years
JUTAI
Carton
45(L)*15(W)*26(H)cm
Shenzhen, China
8530800000
Product Description
Features/Benefits
Δ Reduce overall operating &Maintenance costs: Energy saving 90% reduction in power consumption VS incandescent.
Δ Reliability & traffic safety: Improved visibility over the life of the product reduces emergency lamps outs design minimizes sun phantom effects.
Δ Easy to install into the existing signal enclosure.
Connection Details
Size: Unit (inch:mm)
L-Support type
C-Support Type
Characteristics
JUTAI 110-240V Traffic Signal Lamp Connection
JUTAI BR-C intelligent barrier control panel has a perfect design. It has a Safety Loop Sensor Interface (with JUTAI LD-100), Safety infrared Photocell Interface (with Model IR-20), and Traffic Signal light Warning Interface (with JD112HF-C). This Connection Details Show how to connect the JUTAI signal light. Simply connect the light to three interfaces: G. COM, R Port BR-C Controller, and take power supply directly from the control board, eliminating the need for an additional external power supply.
JUTAI 12-24V Traffic Signal Lamp Connection
When connecting the JUTAI 12-24V Traffic Signal Lamp, replace the connection place and prepare an independent power adapter. Refer to the detailed connection instructions below.
The third-party brand barrier controller
For third-party barrier controller manufacturers without a specific signal light interface location, use our signal light (12-24V) with the RMD-V9 delay relay conversion board. Prepare a separate power adapter with a 12V power supply and connect to the corresponding interface of the barrier to enable the signal warning function.
Application
About us
Δ Reduce overall operating &Maintenance costs: Energy saving 90% reduction in power consumption VS incandescent.
Δ Reliability & traffic safety: Improved visibility over the life of the product reduces emergency lamps outs design minimizes sun phantom effects.
Δ Easy to install into the existing signal enclosure.
Connection Details
Size: Unit (inch:mm)
L-Support type
C-Support Type
Characteristics
| Color | Size(mm) | Model Number | Profile | Voltage(VAC) | LEDs | Typical Wattage at 25°C | Luminance (cd/m²) | Typical Dominant Wavelength (nm) |
| Red | 100 | JD100R-1 | Round | 85~265VAC | 45s | <5 | >1000 | 625 |
| Green | 100 | JD100R-1 | Round | 85~265VAC | 45s | <5.5 | >1000 | 500 |
JUTAI 110-240V Traffic Signal Lamp Connection
JUTAI BR-C intelligent barrier control panel has a perfect design. It has a Safety Loop Sensor Interface (with JUTAI LD-100), Safety infrared Photocell Interface (with Model IR-20), and Traffic Signal light Warning Interface (with JD112HF-C). This Connection Details Show how to connect the JUTAI signal light. Simply connect the light to three interfaces: G. COM, R Port BR-C Controller, and take power supply directly from the control board, eliminating the need for an additional external power supply.
JUTAI 12-24V Traffic Signal Lamp Connection
When connecting the JUTAI 12-24V Traffic Signal Lamp, replace the connection place and prepare an independent power adapter. Refer to the detailed connection instructions below.
The third-party brand barrier controller
For third-party barrier controller manufacturers without a specific signal light interface location, use our signal light (12-24V) with the RMD-V9 delay relay conversion board. Prepare a separate power adapter with a 12V power supply and connect to the corresponding interface of the barrier to enable the signal warning function.
Application
About us
