Opposed type,Cable type,Groove width 30mm
CE certification
Standard: GB/T 14048.10-2016 or
IEC:IEC60947-5-2:2012;
(NO.0B170829.TJGDN20)
PMK50T Groove Photoelectric Sensor is mainly used for the layer detection and position limit of elevator.
| Product Parameters | |
| Photoelectric sensor | PMK50T DC3-wires |
| Detection type | Opposed type |
| Detection object | MinΦ13mm opaque object |
| Groove Width | 30mm |
| Supply voltage | 12~35V DC |
| No-load current | Max.25mA |
| Response time | Max.1ms |
| Light | Infrared LED |
| Sensitivity adjustment | VR adjustment |
| Action mode | Selecting L .On/D .On by changing wire connecting order |
Control output | NPN open collector,Load voltage: Max.35VDC,Load current: Max.200mA,Voltage drop: Max.1.5V; PNP open collector,Output voltage: supply voltage1- .5V,Load current : Max.200mA; |
| Indicator | Power indicator: green;Action indicator: red |
| Protection circuit | Over-voltage protection, short circuit protection |
| Insulation resistance | Min.100MΩ |
| Anti-interference | ±4KV analog square wave interference (width: 0.1ms) |
| Withstand voltage | Voltage: 1000VAC, time: 60s |
| Shock resistance | Acceleration: 500m/s² |
| Anti-vibration | Frequency: 10~50Hz,amplitude: 1mm |
| Ambient brightness | Sunlight: Max.11000Lux fluorescent: Max.3000Lux |
| Ambient temperature | -25ºC~65ºC |
| Ambient humidity | 0~90%RH |
| Housing material | Housing: ABS |
| Shape and size | As dimension |
| Cable | Φ 5, 3×0.3mm² |
| Protection rating | IP67 (IEC) |
| Model | ||
| Installation | Product Model | Detection Distance |
Opposed type | PMK50T-30NF | 30mm |
| PMK50T-30PF | 30mm | |
Q: What kind of products do you manufacture?
A: Our products includes photocell sensor, proximity switch, infrared light curtain, Vehicle separator, Loop detector and laser radar.,etc.
Q: Can I get some samples?
A: Yes, Sample orders are welcomed.
Q: Have photocell sensors 100% assembled well in stock?
A: We have some standard photocell sensors in stock with limited quantity; While
almost all photocell sensors will be newly produced according to your order.
Q: What is the delivery time?
A: 15-30 days for mass production depends on different products
Q: What is your MOQ?
A: We provide small MOQ for each item; it depends on your specific order.
Q: Do you have customization service?
A: Yes, We can provide customized products while the customization needs to meet certain quantity.
Q: Do you test all goods before delivery?
A: Yes, We have 100% test before delivery.
Q: What is your payment term?
A: We usually use 100% T/T in advance; West union and Paypal are also available for small order.
11
Q: Do you provide warranty for the goods?
A: Yes, We provide warranty for all the goods from us. For the sensor product the warranty is 15 months, For the light curtain , laser radar product the warranty is 18 months.
Q: May I visit your factory?
A: Sure, You are always welcome to visit us.
