M18 Ultrasonic Sensor, Ub800-18GM40-E5-V1 Ultrasonic Proximity Sensor

Ultrasonic proximity sensor can replace the P+F brand model UB800-18GM40-E5-V1. Short design, 40 mm; Switch output; Program input.

Ultrasonic proximity sensor
Function indicators visible from all directions.
5 different output functions can be set.


Single head system

General specifications
Sensing range: 50...800 mm
Adjustment range: 70...800 mm
Unusable area: 0...50 mm
Standard target plate: 100 mm x 100 mm
Transducer frequencyapprox. 255 kHz
Response delayapprox. 100 ms
Indicators/operating means
LED greenPower on
LED yellowindication of the switching state
Flashing: Program function object detected
LED redsolid red: Error
Red, flashing: Program function, object not detected


Electrical specifications

Operating voltage: 10...30 V DC, ripple 10 %SS
No-load supply current: ≤ 20 mA

Input
Input type1 program input
Operating distance 1: -UB...+1 V, operating distance 2: +6 V...+UB
Input impedance: > 4, 7 kΩ Program pulse: ≥ 1 s
Output
Output type1 switch output E5, PNP NO/NC, programmable
Rated operational current200 mA, short-circuit/overload protected
Default settingSwitch point A1: 70 mm Switch point A2: 800 mm
Voltage drop≤ 3 V
Repeat accuracy≤ 1 %
Switching frequency≤ 4 Hz
Range hysteresis: 1 % of the set operating distance
Temperature influence: ± 1.5 % of full-scale value

Ambient conditions
Ambient temperature: -25...70 ° C (-13...158 ° F)
Storage temperature: -40...85 ° C (-40...185 ° F)

Mechanical specifications
Protection degree: IP67
ConnectionV1 connector (M12 x 1), 4-pin

Material
Housingbrass, nickel-plated
Transducerepoxy resin/hollow glass sphere mixture; Foam polyurethane, cover PBT

Single head system
General specifications
Sensing range		50...800 mm
Adjustment range		70...800 mm
Unusable area		0...50 mm
Standard target plate		100 mm x 100 mm
Transducer frequency		approx. 255 kHz
Response delay		approx. 100 ms
Indicators/operating means
LED green		Power on
LED yellow		indication of the switching state flashing: program function object detected
LED red		solid red: Error red, flashing: program function, object not detected

   

Electrical specifications
Operating voltage		10...30 V DC, ripple  10  % SS
No-load supply current		≤ 20 mA
Input
Input type		1 program input operating distance 1: -U B...+1 V, operating distance 2: +6 V...+U B input impedance: > 4, 7 kΩ program pulse: ≥ 1 s
Output
Output type		1 switch output E5, PNP NO/NC, programmable
Rated operational current		200 mA, short-circuit/overload protected
Default setting		Switch point A1: 70 mm Switch point A2: 800 mm
Voltage drop		≤ 3 V
Repeat accuracy		≤ 1 %
Switching frequency		≤ 4 Hz
Range hysteresis		1 % of the set operating distance
Temperature influence		± 1.5 % of full-scale value
Ambient conditions
Ambient temperature		-25...70 ° C (-13...158 ° F)
Storage temperature		-40...85 ° C (-40...185 ° F)
Mechanical specifications
Protection degree		IP67
Connection		V1 connector (M12  x  1), 4-pin
Material
	Housing	brass, nickel-plated
	Transducer	epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT

Dimension