1) Has 270.scanning range;
2) Configure the LS01 from a laptop or computer;
3) Different areas can be set (warning area, danger area);
4) Communication interface: USB, 485 (special 485 cable accessories required,Please refer to the appendix);
5) With a variety of input/output modules, easy input/output type switching;
6) With 2 OSSD outputs and 1 AUX output, OSSD output and AUX canindicate different zone types, etc;
7) Output overload protecte;
8) With product operating status OLED display and LED display;
9) Product features can be configured via keystrokes;
10) High efficiency, good concealment, strong anti-interference ability,small size, light weight and reliability.
Product images
| Product parameter | ||
| Project | Parameter | |
| OFF indicates the maximum voltage | 2.0 V | |
| Maximum leakage current | 1 mA | |
| Maximum capacitive load | 1μF | |
| Maximum cable length | 20 m | |
| Shell protection | IP65 | |
| Operating ambient temperature | -10 ºC +50 °C( Freeze-free) | |
| Storage ambient temperature | -25 ºC +60 °C( Freeze-free) | |
| Operating relative humidity | 35 ~85 % Rh(non-condensing) | |
| Storage relative humidity | 35 ~95 % RH | |
| Bient light selfburning lamp | 1500 lx or below | |
| Vibration | 10 ~ 55 Hz, 0.7mm compound amplitude, 20 frequency sweeps in X, Y and Z directions | |
| Impact | 100 m/s (about 10 G) 16 ms pulses, 1000 in each axis in the X, Y and Z directions | |
| Material | Main device (internal support pressed wrong aluminum, stainless steel shell) | |
| Mask PC | ||
| Project | Parameter | |
| Minimum measured object | Diameter 30, 40, 50, 70, 150 mm (depending on setting) | |
| Detectable Angle | 270(° -45°~ 225°) | |
| Response time (ON to OFF) | Default: 120ms(40 ms to 400 ms) | |
| Recovery time (OFF to ON) | Default: 120ms(40 ms to 400 ms) | |
| Standard scan period | 40ms | |
| Maximum monitoring area | 50m(standard white reflective panel) | |
| Maximum detection distance(According to test specimen size) | 4m (40mm specimen) 8m(80mm specimen) 12m(120mm specimen) | |
| Type of light source | 905nm infrared laser | |
| Laser classification | 1 type IEC / EN 60825-1: 2014 | |
| Rated supply voltage | 24 V DC ±10 % | |
| Power consumption | Max. 10W (excluding load) | |
| Output mode | Two-way PNP or NPN (can be set according to the software) | |
| Maximum load curren | t 100 mA | |
| Residual voltage (ON period) | Max 2.5V | |
Factory show
Products Certification
Company Cooperative units
Our Exhibition
Q: Can i get some samples ?/Do you offer samples available?
A: Yes, Paid samples are available, sample cost can be deducted at formal order.
Q: How is the warranty?
A: 18 months warranty. We will take care of all quality issues during this period but the man-made damage, improper operation and force majeure will be excepted.
Q:How about the quality of the products?
A:Products have the certification of CE,CCC,CQC,EU,TUV,UL, and Safety Level achieved Ple,SIL,Type 4,Cat.4 etc.
Q: What is the quality guarantee?
A: ISO 9001-2015 ,ISO 14001 -2015 certified manufacturer, strict quality control system. Besides calibration, each set product we also do aging test before shipment.
Q: Do you have any products in stock?
A: Two factories in stock, fast delivery.
Q: Can I be your distributor?
A: Yes, we are looking for distributors in oversea market and offer full support.
Q: Do you accepte ODM and OEM ?
A: Please contact us for details.
