LOP of Elevator
Product Appearance
HOP Definition
Model | Name | Remark |
EGH-318 |
EGH-318 monochrome display LOP (485 interface) | Need to be marked in order: |
Function of landing panel
Display: According to the elevator signal, display the corresponding floor number
Calling elevator: According to the signal sent by the button, the elevator is controlled by the main board to call the elevator.
Going up/down: During elevator operation, the LCD will accept the signal from the main board and display the upward/downward arrow.
Warning signal:
a. When the car load reaches the limit load, the LCD will accept the signal from the main board and display "FULL LOAD"
b. When the elevator is under inspection, the display will accept the signal sent by the main board and display "OUT OF SERVICE"
Product parameter
a. Monitor parameter
Voltage | DC 24 V |
Rate | 40 mA |
Bright | 300 Cd/m2 |
Working temperature | -20~70ºC |
Storage temperature | -30~80ºC |
Humidity | 10~90%RH |
Technology | Three-digit monochrome LCD, which can display special floors such as 13A and 13B |
View | Horizontal:-80°~80° ,Vertical:-80°~65° . |
Display area | 59(W)×111(H)mm |
backlight | White LED |
Warranty | ≥50000H |
Use
Adjust the correct address code according to the scene;
Avoid contact between metal shell and other conductive objects to cause short circuit and burn out the circuit;
The environmental conditions of the monitor should meet the requirements.
Maintenance
Keep the LCD dry;
Do not hit the display head-on;
Use a dry rag when cleaning.
Faulty Operation
Common fault | Method |
Unavailable calling | 1. Reset address code |
Faulty display | 1. Reset CAN interface; |
Unable to turn on LCD | 1. To check power supply; |
Delivery&Package
1. Products will be packed firmly with carton and foam paper in case of damage while shipping;
2. Production time: 10-15weekdays.
3. Products will be sent in 1-5weekdays.
