ZC0003
CE
Customized
SWR
China
9023009000
Product Description
ZC0003 Multirange Voltage Sensor is used to measure the potential difference at the ends of the electronic components, can be used in DC circuit.
Specification
| Range | -25V~+25V / -2.5V~+2.5V |
| Resolution | 0.01V / 0.001V |
| Accuracy | ±1%F.S |
Usage
Connect the Multirange Voltage sensor to computer by USB cable.
Open the SWR iLab V8.0 software.
Click 'New' to create new experimental template.
Notes
- The Multirange Voltage Sensor needs calibration before use.
- The Multirange Voltage Sensor should parallel connect to circuit.
- The red conducting wire is connected to the high-voltage terminal and the black conducting wire is connected to the low-voltage terminal so that measured value is positive. Otherwise it will be negative.
- When measuring, please do not make the measured voltage exceeds the range of the sensor.
- Do not plug in and out USB frequently. Minimum plug interval is 2s.
Typical experiment
Measure the electrodynamic potential and internal resistance of battery
VA characteristics of small bulb, diode and conductor
Ohm's law
Series-parallel circuit of resistance
LC oscillation
The charging and discharging of capacitor
