Xct25L5-I
1 Year
CE, ISO9001
New
48.1m
25ton
3
Four-Arm
Straight Arm
Xct25L5_Y
12438*2550*3415mm
30600kg
Sc7h260q3
192/2200kw/(R/Min)
85km/H
2-3km/H
25t
965kn.M
90
6000/12300/122300kg
Oriemac
Nude
25000kg
Jiangsu China
87051091
Product Description
China Xuzhou 25ton Hydraulic Truck Crane Xct25L5-I Mobile Crane with Shangchai Engine
Product descriptionXCT25L5-Y Truck crane is widely used for the lifting operations in general engineering projects, such as construction site, urban renewal, communication and transportation, ports, bridge, oilfields and mine, and complex working environments. Four outriggers arranged in H-shape are hydraulically controlled by control levers. There is an outrigger control station located at each side of the chassis, and there is a level gauge on each control station. The outrigger movements can be simultaneously or separately controlled at any side of the chassis. There is a check valve fitted in each outrigger cylinder, and a double-way hydraulic valve fitted in each jack cylinder. Fifth jack is equipped. Longitudinal ×lateral (fully-extended): 5.23 m×6.40 m Outrigger float diameter: φ400 mm 5th jack float diameter: φ260 mm Reaction force of outrigger at max. lifting load: 312 kN
Frame
Designed and manufactured by itself, it is made of high strength steel with fully covered walking surface and anti-torsion box-typed structure.
Outriggers
Engine
SC7H260Q3, in-line, 6-cylinder, supercharged, intercooled diesel engine, made by Shanghai Diesel Engine, with rated power of 192 kW/2200 rpm, max. torque of 1000 Nm/1400 rpm, compliant with China III emission standard. Fuel tank capacity: 240 L.
Gearbox
Mechanical transmission with a synchronizer, made by Shaanxi F a s t Gear Co., Ltd., 8-forward speed and 2-reverse speed.
Alxes
Three-axle chassis, Meri tor single-stage reduction axle
Suspension
Leaf springs with tapered cross-section are adopted for front suspensions, light dead weight and low noise; rubber spring suspensions with V-type push rods are adopted for rear axles, light dead weight and free of maintenance.
Tires
11.00-20, suitable for heave load vehicles, strong commonality.
Tire specifications: 11.00 R20
Brakes
Double-circuit, air pressure brake, drum brake. Service brake: double-circuit air pressure brake acting on all wheels. Parking brake: air-release brake, acting on wheels of axles 2-3. Auxiliary brake: engine exhaust brake, which is safe and reliable, and will prolong the service life of brake lining.
Steering
Mechanically steering mechanism with a hydraulic booster
Driver's cab
New type, steel, full dimension cab with 4-point connecting structure, has swing-out doors at both sides. Manually adjustable driver's seat in height is available. A simple sleeper for the co-driver's seat is installed to supply comfort and reduce fatigue. The cab has better thermal insulation effect. Safety glass, electrically operated door window lifters, electrically adjusted mirrors make operation convenient and safe. Steering wheel is adjustable in height and angle. Heater and Air conditioner is standard.
Electrical system
24 V DC, two sets of 12 V battery in series. Generator output voltage is 28±0.3 V, and output current is 70 A.
Boom system
Boom
Four-section boom with U-shape profile, made of high strength steel, with special anti-deformation design. Double cylinder plus ropes is used to telescope the boom. Boom length: 10.4 m~40.5 m
Single top
Fitted at boom head, used for single line operation. Its lifting performance is the same as that for boom, but the maximum lifting load does not exceed 2.8 t.
Swing-away jib
The jib consists of a connecting bracket, a rotating bracket and a foldable lattice jib. Three offset angles of 0°, 15°and 30°are available. It is stowed along the side of the boom. Fixed jib length: 8.3 m.
Under lung jib
Box-type under lung jib, with offset angles of 5°, 15°and 30°. Fixed jib length: 8.3 m.
Specification
Item | XCT25L5_Y |
Overall length (mm) | 12438 |
Overall width mm) | 2550 |
Overall height (mm) | 3415 |
Wheelbase (mm) | 4425+1350 |
Track (mm) | 2055/1834 |
Weight | |
Total weight in travel (kg) | 30600 |
axle load (kg) | 6000/12300/12300 |
Engine | |
Engine model | SC7H260Q3 |
Engine rated power (kw/(r/min)) | 192/2200 |
Engine rated torque (N.m/(r/min)) | 1000/1400 |
Max. travel speed (km/h) | ≥85 |
Min. travel speed km/h) | 2~3 |
Turning | |
Min. turning diameter (m) | ≤20 |
Max. grade ability (%) | ≥25 |
Min. ground clearance (mm) | 261 |
Approach angle (°) | 16.5 |
Departure angle (°) | 13 |
Fuel consumption for 100km (L) | 33 |
Maximum rated lifting capacity (t) | 25 |
Min. rated working radius (m) | 3 |
Max. lifting torque (kN·m) | 965 |
Turning radius at turntable tail (mm) | 3500 |
Outrigger span | |
Longitudinal(m) | 5.23 |
Lateral (m) | 6.4 |
Max. lifting height | |
Base boom (m) | 10.5 |
Max.main boom (m) | 40.3 |
Max.main boom+jib (m) | 48.1 |
Base boom length (m) | 10.4 |
Max.main boom length (m) | 40.5 |
48.8Max.main boom+jib length | 48.8 |
Working speed | |
Slewing speed (r/min) | ≥3 |
Max. hoist rope speed | |
Main winch | ≥135 |
Auxiliary Hoist | ≥135 |
Fully-extended time(s) | ≤90 |
Product Show
