GXY-2 drilling rig is a vertical transmission rotary drilling rig with mechanical transmission and hydraulic feed. It can be
applied to engineering geological survey, general survey of solid deposits, grouting of dams and ventilation and drainage
of tunnels. Depending on the drilling formation, cemented carbide, steel sand, spiral and other types of drill bits can be
selected for drilling.
Main Feature:
The structure of this rig has the following characteristics:
1. A more reasonable speed range is selected. There are eight speed levels, centralized speed change, self-locking with
each other, large low-speed torque, and a wide range of use.
2. The drilling rig has two speeds of reversing speed, which is convenient for handling faults safely.
3. The self-centering hydraulic chuck is adopted, which is convenient for clamping and loosening the drill pipe. And has a
hydraulic feed mechanism, strong pressure and lifting capacity.
4. Equipped with sufficient instruments, it is helpful to grasp the situation in the hole, fewer operating handles, more
reasonable layout, flexible and reliable operation.
5. The two-plate normally closed friction clutch is adopted, which is flexible to open and close, and easy to adjust and use.
6. The rig is light in weight, compact in structure, easy to disassemble, and suitable for drilling work in hills or mountains.
7. GYQ-300A is the improved type of GXY-2. The main upgraded point is adding the detached structure of the lifting hoists,
which can increase the service life of the hoists.
Specification:
| Type | GXY-2 (Improved type is GXQ-300A) |
| Drilling Depth | 300-600m |
| Diameter of Drill Rods | 42,50mm |
| Vertical Shaft Rotating Speed | Clockwise:70;121;190;263; 329;570;899;1241r/min ; Anti-clockwise:55;257r/min |
| Max. Torque | 2760Nm |
| Max.Lifting Force of Vertical Shaft | 72KN |
| Vertical Stroke | 600mm |
| Through-hole Diameter of Vertical Shaft | 68mm |
| Maximum Feed Force | 54KN |
| Max.Lifting Force of Single Hoist Rope | 30KN |
| Diameter of Steel Wire Rope | 16mm |
| Lifting Speed | 0.41;0.73;1.15;1.58m/s |
| Moving Stroke | 465mm |
| Power Configuration | Diesel Engine:4100 40KW; Electromotor: 22KW |
| Profile Size (Length x Width x Height) | 2160×950×1800mm |
| Weight | Without Power Unit:1000kg/set |
| With Diesel Engine: 1700kg/set | |
| With Motor: 1300kg/set |
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5~10 days if the goods are in stock.Or it is 45 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shipment.
irrevocable LC at sight.
